Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black mid-tower case with tempered glass side panel and front mesh intake

SAMA

SAMA S50 Black ATX Mid Tower PC Case

SKU CH-R7E7-VA6ED MPN S50 Black

Mid-tower ATX case with dual-chamber layout, 47 mm cable routing space, four pre-installed 120 mm ARGB PWM fans, top-mounted 360 mm radiator support.

  • ColorBlack
  • Case MaterialABS / SPCC / Tempered Glass
  • Motherboard CompatibilityATX / ITX / Micro ATX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays3
  • Expansion Slots7

Option S50 Black

  • PPLP A+ certified high-density mesh delivers extreme airflow
  • Four pre-installed ARGB PWM fans with built-in hub for instant cooling and lighting
  • Dual-chamber layout with 47mm cable space keeps builds clean and tidy
  • Supports 360mm top radiator, 410mm GPU, 165mm CPU cooler and 11 fans total
  • Tool-less panels plus USB 3.2 Gen2x2 Type-C front I/O for quick access and fast connectivity

Built for High-End Air and Liquid Builds

The SAMA S50 Black is a mid-tower chassis designed for ATX, Micro-ATX and ITX motherboards, including back-connect layouts. Its dual-chamber structure separates the power supply and cabling from the main component area, providing a 47mm routing space behind the motherboard tray. Seven expansion slots and room for up to eleven 120mm fans give builders flexibility for high-performance hardware.

Certified Airflow and Quiet PWM Control

The case carries PPLP.info A+ certification for its high-density metal mesh on the front and top panels, engineered to maximise intake and exhaust efficiency. Four ARGB PWM fans are pre-installed — three at the front and one at the rear — and connect to a built-in hub for synchronised speed and lighting control. Top mounts accept radiators up to 360mm, while the front and bottom each support three 120mm fans for extensive cooling configurations.

410mm GPU Clearance Decides Fit

The single specification that determines compatibility is the maximum graphics card length of 410mm. Builders planning to install longer triple-slot cards must verify their model fits within this limit. The chassis also accommodates CPU coolers up to 165mm tall and ATX power supplies up to 180mm deep, but the GPU length is the critical constraint for most high-end builds.

Přednosti

  • PPLP A+ certified high-density mesh delivers extreme airflow
  • Four pre-installed ARGB PWM fans with built-in hub for instant cooling and lighting
  • Dual-chamber layout with 47mm cable space keeps builds clean and tidy
  • Supports 360mm top radiator, 410mm GPU, 165mm CPU cooler and 11 fans total
  • Tool-less panels plus USB 3.2 Gen2x2 Type-C front I/O for quick access and fast connectivity

Specifikace

BrandSAMA
ModelS50 Black
ColorBlack
Case MaterialABS / SPCC / Tempered Glass
Motherboard CompatibilityATX / ITX / Micro ATX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Expansion Slots7
Fan OptionsBottom - 3 x 120mm / Front - 3 x 120mm / Rear - 1 x 120mm / Side - 1 x 120mm / Top - 3 x 120mm
Pre-installed FansFront - 3 x 120mm / Rear - 1 x 120mm
Radiator OptionsTop - Up to 120mm / Top - Up to 140mm / Top - Up to 240mm / Top - Up to 280mm / Top - Up to 360mm
Max GPU Length410 mm
Max CPU Cooler Height165 mm
Dimensions18.70 x 9.25 x 16.77
Weight7.3kg
Přepravní hmotnost8.57 kg
Rozměry balení521 × 483 × 292 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the four pre-installed ARGB PWM fans and connect them to the built-in hub?

The case comes with three front and one rear 120mm ARGB PWM fans already mounted. Connect each fan's PWM and ARGB cables to the included hub, then run the hub's leads to a motherboard 5V ARGB header and a PWM fan header for synchronised control.

What maintenance will the pre-installed fans and dust filters need over time?

The front and top high-density metal mesh panels act as intake filters. Remove them periodically and clean with compressed air or a soft brush to maintain the PPLP.info A+ certified airflow. The four pre-installed 120mm fans can be wiped down during the same routine.

What thermal limit appears first when running a 360mm top radiator under sustained load?

The top panel supports radiators up to 360mm. Under continuous heavy load the limiting factor becomes the case's ability to exhaust that heat through the top mesh, so monitor coolant temperatures to ensure the 360mm radiator remains effective.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.