Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black mid-tower case with tempered glass side panel and six ARGB infinity mirror fans visible behind front mesh

SAMA

SAMA V43-BKADA6X1-GL PC case, 6 ARGB fans, 360 mm radiator, 427 mm GPU, tempered glass

SKU CH-RWQD-43P59 MPN V43-BKADA6X1-GL

Mid-tower ATX case with six pre-installed 120 mm ARGB fans, 360 mm top radiator support, 427 mm GPU clearance and tempered glass side panel

  • Motherboard CompatibilityATX/M-ATX/ITX
  • ColorBlack
  • Case MaterialABS / SPCC / Tempered Glass
  • TypeATX Mid Tower
  • PSU Main Connector24Pin
  • LEDARGB

Model V43 Black

  • Six pre-installed 120 mm ARGB infinity mirror fans deliver vivid lighting and strong airflow
  • Reverse-blade fans on bottom and side keep RGB visible while moving air through the chassis
  • Built-in 6+6 port PWM and ARGB hub synchronises lighting and fan speed from one controller
  • Top panel accepts a 360 mm radiator for liquid-cooling high-performance CPUs
  • Tempered-glass side panel and 427 mm GPU clearance showcase full-length graphics cards

Build-ready mid-tower with six ARGB fans

The SAMA V43 ships with six 120 mm PWM ARGB infinity-mirror fans already mounted, plus a 6+6 port PWM and ARGB hub that centralises speed and lighting control. A 4 mm tempered-glass side panel and black SPCC steel frame complete the showcase look.

Straightforward assembly with hub-managed cabling

Motherboard trays accept ATX, M-ATX and ITX boards, while the PSU shroud hides cables and includes mesh for bottom intake. Magnetic dust filters on top and bottom lift off for cleaning, and the pre-wired hub reduces the usual tangle of fan and LED leads.

Fits 427 mm graphics cards and 360 mm top radiators

Two 3.5-inch and one 2.5-inch internal drive bays provide storage headroom. CPU cooler clearance reaches 165 mm, and the PSU compartment accommodates units up to 260 mm long, leaving ample space for high-end air or liquid cooling.

Přednosti

  • Six pre-installed 120 mm ARGB infinity mirror fans deliver vivid lighting and strong airflow
  • Reverse-blade fans on bottom and side keep RGB visible while moving air through the chassis
  • Built-in 6+6 port PWM and ARGB hub synchronises lighting and fan speed from one controller
  • Top panel accepts a 360 mm radiator for liquid-cooling high-performance CPUs
  • Tempered-glass side panel and 427 mm GPU clearance showcase full-length graphics cards

Specifikace

Motherboard CompatibilityATX/M-ATX/ITX
ColorBlack
Case MaterialABS / SPCC / Tempered Glass
TypeATX Mid Tower
PSU Main Connector24Pin
LEDARGB
Front PortsUSB3.2 Gen2 Type-Cx1, USB3.0 x 2, HD Audio
120mm Fans6
140mm Fans2
Fan OptionsTop: 3 x 120mm/2 x 140mm
Rear: 1 x 120mm
Side: 2 x 120mm
Bottom: 3 x 120mm(PSU Shroud)
Pre-installed Fans6pcs
BrandSAMA
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Max GPU Length427 mm
Max CPU Cooler Height165 mm
Max PSU Length260 mm
Dimensions460*220*490MM
Weight6.9kg
Přepravní hmotnost8.44 kg
Rozměry balení559 × 521 × 305 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I confirm the six pre-installed ARGB infinity-mirror fans and the PWM hub are functioning after I build in the V43?

Power the system and check that all six 120 mm fans spin and light up; then use motherboard software or the case hub to verify synchronized ARGB control and PWM speed curves for each connected fan.

Which items come in the V43 box and which parts must be sourced separately?

The case ships with six pre-installed 120 mm ARGB fans, a 6+6 port PWM/ARGB hub, magnetic dust filters for top and bottom, a 4 mm tempered-glass side panel, and the standard mounting hardware; you still need to purchase the motherboard, CPU, GPU, PSU, storage drives and any extra fans or radiators you want to add.

Should I choose the version that supports a 360 mm top radiator or a smaller one for my liquid-cooling loop?

The V43 only lists support for up to a 360 mm radiator in the top position, so select this version if you plan a 360 mm AIO; no smaller radiator-specific variant is offered for this model.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.