Seagate
Seagate Exos 7E10 6TB 3.5" SATA 7200rpm 256MB Cache ST6000NM019B
A 6 TB enterprise 3.5" SATA drive spinning at 7200 RPM with 256 MB cache for 24/7 workloads
- InterfaceSATA 6.0Gb/s
- Capacity6TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Cache256MB
- UsageFor Enterprise Storage
- 6TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers fast sequential throughput
- 256MB cache buffers heavy write workloads
- SATA 6.0Gb/s interface integrates with existing servers
- 5-inch form factor fits standard drive bays
Enterprise bulk storage
The Seagate Exos 7E10 ST6000NM019B is a 6TB 3.5-inch internal hard drive built for 24/7 enterprise workloads. It delivers 7200 RPM performance over a SATA 6.0Gb/s interface with a 256MB cache. Designed for replicated and RAID multi-drive systems, it supports 550TB per year workloads and a 2 million hour MTBF rating.
Upgrade from desktop drives
This drive replaces standard desktop hard drives where sustained write loads and vibration tolerance matter. The jump is worth it when your workload exceeds 55TB per year or when rotational vibration in multi-bay chassis causes errors. PowerChoice and Seagate RAID Rebuild let you tune power and rebuild times for near-line deployments.
Check host interface and bay
Verify your system provides a SATA 6.0Gb/s port and a 3.5-inch drive bay with adequate cooling for continuous operation. The product ships in OEM or retail packing that may vary. No SAS cable or adapter is included; the SATA interface is the only connection supported on this model.
Přednosti
- 6TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers fast sequential throughput
- 256MB cache buffers heavy write workloads
- SATA 6.0Gb/s interface integrates with existing servers
- 5-inch form factor fits standard drive bays
Specifikace
| Brand | Seagate |
|---|---|
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Cache | 256MB |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Přepravní hmotnost | 2.27 kg |
| Rozměry balení | 147 × 102 × 26 mm |
Otázky k tomuto produktu
Does the 3.5" form factor need a standard drive bay and SATA power connector?
Yes, the 3.5" form factor fits a standard drive bay and uses a SATA power connector with the SATA 6.0Gb/s interface.
Is any jumper setting required when installing this SATA 6.0Gb/s drive?
No jumper is required; connect the SATA data and power cables and the drive is recognised automatically.
What workload limit should I plan for over the drive's life?
The drive is rated for 550TB per year workload with a 2 million hour MTBF rating.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
