Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 3.5 inch SATA hard drive with circuit board visible

Seagate

Seagate Exos 7E10 6TB 3.5" SATA 7200rpm 256MB Cache ST6000NM019B

SKU CH-QWSH-ZKF9G MPN ST6000NM019B

A 6 TB enterprise 3.5" SATA drive spinning at 7200 RPM with 256 MB cache for 24/7 workloads

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache256MB
  • UsageFor Enterprise Storage
  • 6TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 256MB cache buffers heavy write workloads
  • SATA 6.0Gb/s interface integrates with existing servers
  • 5-inch form factor fits standard drive bays

Enterprise bulk storage

The Seagate Exos 7E10 ST6000NM019B is a 6TB 3.5-inch internal hard drive built for 24/7 enterprise workloads. It delivers 7200 RPM performance over a SATA 6.0Gb/s interface with a 256MB cache. Designed for replicated and RAID multi-drive systems, it supports 550TB per year workloads and a 2 million hour MTBF rating.

Upgrade from desktop drives

This drive replaces standard desktop hard drives where sustained write loads and vibration tolerance matter. The jump is worth it when your workload exceeds 55TB per year or when rotational vibration in multi-bay chassis causes errors. PowerChoice and Seagate RAID Rebuild let you tune power and rebuild times for near-line deployments.

Check host interface and bay

Verify your system provides a SATA 6.0Gb/s port and a 3.5-inch drive bay with adequate cooling for continuous operation. The product ships in OEM or retail packing that may vary. No SAS cable or adapter is included; the SATA interface is the only connection supported on this model.

Prednosti

  • 6TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 256MB cache buffers heavy write workloads
  • SATA 6.0Gb/s interface integrates with existing servers
  • 5-inch form factor fits standard drive bays

Špecifikácie

BrandSeagate
InterfaceSATA 6.0Gb/s
Capacity6TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache256MB
UsageFor Enterprise Storage
Form Factor3.5"
Prepravná hmotnosť2.27 kg
Rozmery balenia147 × 102 × 26 mm

Otázky k tomuto produktu

Does the 3.5" form factor need a standard drive bay and SATA power connector?

Yes, the 3.5" form factor fits a standard drive bay and uses a SATA power connector with the SATA 6.0Gb/s interface.

Is any jumper setting required when installing this SATA 6.0Gb/s drive?

No jumper is required; connect the SATA data and power cables and the drive is recognised automatically.

What workload limit should I plan for over the drive's life?

The drive is rated for 550TB per year workload with a 2 million hour MTBF rating.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.