Seagate
Seagate Exos 7E10 6TB 3.5" SATA 7200rpm 256MB Cache ST6000NM019B
A 6 TB enterprise 3.5" SATA drive spinning at 7200 RPM with 256 MB cache for 24/7 workloads
- InterfaceSATA 6.0Gb/s
- Capacity6TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Cache256MB
- UsageFor Enterprise Storage
- 6TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers fast sequential throughput
- 256MB cache buffers heavy write workloads
- SATA 6.0Gb/s interface integrates with existing servers
- 5-inch form factor fits standard drive bays
Enterprise bulk storage
The Seagate Exos 7E10 ST6000NM019B is a 6TB 3.5-inch internal hard drive built for 24/7 enterprise workloads. It delivers 7200 RPM performance over a SATA 6.0Gb/s interface with a 256MB cache. Designed for replicated and RAID multi-drive systems, it supports 550TB per year workloads and a 2 million hour MTBF rating.
Upgrade from desktop drives
This drive replaces standard desktop hard drives where sustained write loads and vibration tolerance matter. The jump is worth it when your workload exceeds 55TB per year or when rotational vibration in multi-bay chassis causes errors. PowerChoice and Seagate RAID Rebuild let you tune power and rebuild times for near-line deployments.
Check host interface and bay
Verify your system provides a SATA 6.0Gb/s port and a 3.5-inch drive bay with adequate cooling for continuous operation. The product ships in OEM or retail packing that may vary. No SAS cable or adapter is included; the SATA interface is the only connection supported on this model.
商品特色
- 6TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers fast sequential throughput
- 256MB cache buffers heavy write workloads
- SATA 6.0Gb/s interface integrates with existing servers
- 5-inch form factor fits standard drive bays
商品規格
| Brand | Seagate |
|---|---|
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Cache | 256MB |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| 出貨重量 | 2.27 kg |
| 包裝尺寸 | 147 × 102 × 26 mm |
商品問答
Does the 3.5" form factor need a standard drive bay and SATA power connector?
Yes, the 3.5" form factor fits a standard drive bay and uses a SATA power connector with the SATA 6.0Gb/s interface.
Is any jumper setting required when installing this SATA 6.0Gb/s drive?
No jumper is required; connect the SATA data and power cables and the drive is recognised automatically.
What workload limit should I plan for over the drive's life?
The drive is rated for 550TB per year workload with a 2 million hour MTBF rating.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
DELL 7T0DW 600GB 2.5" SAS 10000 RPM laptop hard drive
- Serial Attached SCS…
- 10000 RPM
Seagate ST500LT015 500GB 5400 RPM 16MB Cache SATA 6.0Gb/s 2.5" 7mm laptop hard drive
- 500GB
- 5400 RPM



