Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch SATA hard drive with circuit board visible

Seagate

Seagate Exos 7E10 6TB 3.5" SATA 7200rpm 256MB Cache ST6000NM019B

SKU CH-QWSH-ZKF9G MPN ST6000NM019B

A 6 TB enterprise 3.5" SATA drive spinning at 7200 RPM with 256 MB cache for 24/7 workloads

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache256MB
  • UsageFor Enterprise Storage
  • 6TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 256MB cache buffers heavy write workloads
  • SATA 6.0Gb/s interface integrates with existing servers
  • 5-inch form factor fits standard drive bays

Enterprise bulk storage

The Seagate Exos 7E10 ST6000NM019B is a 6TB 3.5-inch internal hard drive built for 24/7 enterprise workloads. It delivers 7200 RPM performance over a SATA 6.0Gb/s interface with a 256MB cache. Designed for replicated and RAID multi-drive systems, it supports 550TB per year workloads and a 2 million hour MTBF rating.

Upgrade from desktop drives

This drive replaces standard desktop hard drives where sustained write loads and vibration tolerance matter. The jump is worth it when your workload exceeds 55TB per year or when rotational vibration in multi-bay chassis causes errors. PowerChoice and Seagate RAID Rebuild let you tune power and rebuild times for near-line deployments.

Check host interface and bay

Verify your system provides a SATA 6.0Gb/s port and a 3.5-inch drive bay with adequate cooling for continuous operation. The product ships in OEM or retail packing that may vary. No SAS cable or adapter is included; the SATA interface is the only connection supported on this model.

Puncte forte

  • 6TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 256MB cache buffers heavy write workloads
  • SATA 6.0Gb/s interface integrates with existing servers
  • 5-inch form factor fits standard drive bays

Specificații

BrandSeagate
InterfaceSATA 6.0Gb/s
Capacity6TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache256MB
UsageFor Enterprise Storage
Form Factor3.5"
Greutate la expediere2.27 kg
Dimensiunile coletului147 × 102 × 26 mm

Întrebări despre acest articol

Does the 3.5" form factor need a standard drive bay and SATA power connector?

Yes, the 3.5" form factor fits a standard drive bay and uses a SATA power connector with the SATA 6.0Gb/s interface.

Is any jumper setting required when installing this SATA 6.0Gb/s drive?

No jumper is required; connect the SATA data and power cables and the drive is recognised automatically.

What workload limit should I plan for over the drive's life?

The drive is rated for 550TB per year workload with a 2 million hour MTBF rating.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.