Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver PCMCIA Type II card with single DB9 serial port and isolation markings

SerialGear

SerialGear SG-RS1SIS PCMCIA Single Port RS-422/485 Expansion Card with Isolation

SKU CH-TPAW-B90TW

Adds one isolated RS-422/485 serial port via PCMCIA with 15 KV ESD protection and 921.6 Kbps speed

  • External Ports1 x Serial Port
  • Add a serial port via PCMCIA with 16C950 UART
  • Auto transceiver turn-around handled by ATTA hardware
  • Supports 4-wire RS-422/485 and 2-wire RS-485 modes
  • Isolated port with 15 KV ESD surge protection
  • Works in 32-bit CardBus and 16-bit PCMCIA R7.1 slots

Single-port isolated serial card

The SerialGear SG-RS1SIS adds one isolated RS-422/485 port to a laptop or thin client through a PCMCIA slot. It targets engineers and technicians who need a single protected serial link for industrial equipment or legacy data collection. The CardBus Type-II design works in 32-bit and 16-bit PCMCIA 7.1 sockets. Buyers who need two simultaneous serial ports should choose a dual-port alternative.

Plug-and-play install with legacy caveats

The card uses 16C950 UARTs and installs through a standard wizard that handles I/O addresses and IRQs automatically. No jumpers or DMA settings are required. The main friction point appears on newer operating systems where a signed driver for the PCMCIA bus may be missing, so verify driver availability before purchase.

921.6 kbps headroom for industrial links

The port sustains up to 921.6 kbps in both 4-wire RS-422/485 and 2-wire RS-485 modes, with hardware auto transceiver turn-around managing direction changes. Isolation and 15 kV ESD surge protection shield the host from ground loops and transients. Bandwidth runs out when multiple high-speed devices share one port or when cable runs exceed the electrical limits of the RS-485 standard.

Přednosti

  • Add a serial port via PCMCIA with 16C950 UART
  • Auto transceiver turn-around handled by ATTA hardware
  • Supports 4-wire RS-422/485 and 2-wire RS-485 modes
  • Isolated port with 15 KV ESD surge protection
  • Works in 32-bit CardBus and 16-bit PCMCIA R7.1 slots

Specifikace

ModelSG-RS1SIS
External Ports1 x Serial Port

Otázky k tomuto produktu

How can I verify the SG-RS1SIS card is operating correctly after installing it in a PCMCIA slot?

The system will recognise the device automatically and install drivers through the Install Wizard without manual I/O address, IRQ or DMA configuration.

What comes with the card and what must I source separately for RS-422/485 connections?

The package includes the PCMCIA expansion card; cables or adapters for 4-wire RS-422/485 or 2-wire RS-485 wiring are not included and must be purchased separately.

Which SG-RS1SIS variant should I choose for isolated 15KV ESD protection and 921.6Kbps speed on a CardBus Type-II slot?

This single-port model provides 15KV ESD surge protection, RS-422/485 operation up to 921.6Kbps, and fits a fully 32-bit CardBus Type-II slot with 16-bit PCMCIA R7.1 backward compatibility.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.