BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278351BTC
재고 있음
SerialGear
SerialGear SG-RS1SIS PCMCIA Single Port RS-422/485 Expansion Card with Isolation
Adds one isolated RS-422/485 serial port via PCMCIA with 15 KV ESD protection and 921.6 Kbps speed
- External Ports1 x Serial Port
- Add a serial port via PCMCIA with 16C950 UART
- Auto transceiver turn-around handled by ATTA hardware
- Supports 4-wire RS-422/485 and 2-wire RS-485 modes
- Isolated port with 15 KV ESD surge protection
- Works in 32-bit CardBus and 16-bit PCMCIA R7.1 slots
Single-port isolated serial card
The SerialGear SG-RS1SIS adds one isolated RS-422/485 port to a laptop or thin client through a PCMCIA slot. It targets engineers and technicians who need a single protected serial link for industrial equipment or legacy data collection. The CardBus Type-II design works in 32-bit and 16-bit PCMCIA 7.1 sockets. Buyers who need two simultaneous serial ports should choose a dual-port alternative.
Plug-and-play install with legacy caveats
The card uses 16C950 UARTs and installs through a standard wizard that handles I/O addresses and IRQs automatically. No jumpers or DMA settings are required. The main friction point appears on newer operating systems where a signed driver for the PCMCIA bus may be missing, so verify driver availability before purchase.
921.6 kbps headroom for industrial links
The port sustains up to 921.6 kbps in both 4-wire RS-422/485 and 2-wire RS-485 modes, with hardware auto transceiver turn-around managing direction changes. Isolation and 15 kV ESD surge protection shield the host from ground loops and transients. Bandwidth runs out when multiple high-speed devices share one port or when cable runs exceed the electrical limits of the RS-485 standard.
주요 특징
- Add a serial port via PCMCIA with 16C950 UART
- Auto transceiver turn-around handled by ATTA hardware
- Supports 4-wire RS-422/485 and 2-wire RS-485 modes
- Isolated port with 15 KV ESD surge protection
- Works in 32-bit CardBus and 16-bit PCMCIA R7.1 slots
사양
| Model | SG-RS1SIS |
|---|---|
| External Ports | 1 x Serial Port |
이 상품에 대한 질문
How can I verify the SG-RS1SIS card is operating correctly after installing it in a PCMCIA slot?
The system will recognise the device automatically and install drivers through the Install Wizard without manual I/O address, IRQ or DMA configuration.
What comes with the card and what must I source separately for RS-422/485 connections?
The package includes the PCMCIA expansion card; cables or adapters for 4-wire RS-422/485 or 2-wire RS-485 wiring are not included and must be purchased separately.
Which SG-RS1SIS variant should I choose for isolated 15KV ESD protection and 921.6Kbps speed on a CardBus Type-II slot?
This single-port model provides 15KV ESD surge protection, RS-422/485 operation up to 921.6Kbps, and fits a fully 32-bit CardBus Type-II slot with 16-bit PCMCIA R7.1 backward compatibility.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
