Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Plastic case with divided compartments holding twelve silver screw types

STARTECH

STARTECH PCSCREWKIT Assortment of Screws, Nuts and Standoffs 12 Types

SKU CH-DSDW-QR4NE

Handy plastic case holds 12 types of PC screws, nuts and standoffs for building and repairs

  • TypesScrews & Mount
  • ColorsSilver
  • Length0 ft.
  • SpecificationsScrew 6-32 x .25": Used in PC case cover and I/O plates Scre
  • FeaturesHandy plastic case with dividers Label inside the lid explai

Option Kit - Assortment

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 12 fastener types cover common PC builds
  • plastic case with dividers keeps parts organised
  • lid label explains typical use for each item
  • 6-32 and M3 screws suit drives, boards and I/O plates
  • 4-40 and standoffs handle connectors and motherboard mounting

Assortment of 12 fastener types

This StarTech.com kit provides an assortment of 12 different screws, nuts and standoffs for building, repairing or maintaining computer systems. It is intended for system builders, technicians and hobbyists who need a ready supply of common PC fasteners in one organised package.

Check your chassis and component threads

Before ordering, verify the thread types required by your case panels, drive bays, motherboard standoffs and expansion-slot brackets. The kit contains 6-32, M3 and 4-40 machine screws in lengths of 15, 18 and 25 thousandths of an inch, plus matching nuts and standoffs; confirm these match your hardware.

Plastic case with labelled dividers

The fasteners come in a handy plastic carrying case with divided compartments and a label inside the lid that explains the common use for each item and lists a StarTech.com reorder part number for replenishment. This keeps the 12 types sorted and identifiable during assembly or repair work.

Přednosti

  • 12 fastener types cover common PC builds
  • plastic case with dividers keeps parts organised
  • lid label explains typical use for each item
  • 6-32 and M3 screws suit drives, boards and I/O plates
  • 4-40 and standoffs handle connectors and motherboard mounting

Specifikace

BrandStarTech.com
ModelPCSCREWKIT
TypesScrews & Mount
ColorsSilver
Length0 ft.
SpecificationsScrew 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboar
FeaturesHandy plastic case with dividers
Label inside the lid explains common use for each item, and lists a StarTech.com reorder part number for replenishment
Přepravní hmotnost0.50 kg
Rozměry balení198 × 99 × 43 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What screw types and sizes are included in the 12-compartment case?

The kit contains 12 fastener types: 6-32 x .25" case and I/O screws, 6-32 x .15" hard-drive screws, M3 x .25" floppy, optical and motherboard screws, 4-40 x .18" I/O plate screws, plus additional nuts and standoffs.

Which version of the kit should I choose for a standard ATX build?

Only one version exists — the PCSCREWKIT with 12 assorted fasteners in a single divided case — so there is no capacity or model choice to make.

Will the 6-32 x .15" and M3 x .25" screws cover both my 3.5" drives and motherboard standoffs?

Yes, the 6-32 x .15" screws are specified for hard-drive installation and the M3 x .25" screws for motherboard mounting, matching the two most common ATX fastening jobs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.