Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Supermicro 1U counter-rotating CPU cooler, 40x40x56 mm, 6-pin connector

Supermicro

Supermicro FAN-0085L 1U 40x40x56mm 6-pin Counter-rotating CPU Cooler

SKU CH-36D9-6R6XP

Counter-rotating 1U cooler spins at 13300 rpm and delivers 26.4 CFM through a 6-pin connector

  • TypeFan & Heatsinks
  • RPM1 x 13300 rpm
  • Air Flow1 x 26.4 CFM
  • Power Connector6-pin
  • 13,300 rpm counter-rotating design moves 26.4 CFM through tight 1U spaces
  • 40 × 56 mm footprint fits dense server chassis without blocking adjacent slots
  • Six-pin connector enables PWM control for precise thermal management
  • Counter-rotating blades reduce vibration for quieter rack operation
  • 85 mm height clears low-profile memory and VRM heatsinks

Compact 1U cooler for dense servers

The Supermicro FAN-0085L is a 40 x 40 x 56 mm counter-rotating CPU air cooler built for 1U rackmount chassis. It targets system integrators and administrators who need reliable thermal performance in space-constrained environments where standard tower coolers cannot fit.

Counter-rotating design boosts airflow

The single fan spins at 13300 rpm and delivers 26.4 CFM through the heatsink. Counter-rotating blades reduce turbulence inside the narrow duct, so the unit moves more air per millimetre of height than a conventional single-direction fan of the same footprint.

Direct 6-pin mount simplifies installation

The cooler attaches with a 6-pin power connector that plugs straight into a compatible Supermicro server header, removing the need for adapters or cable routing. Clearance is tight in 1U layouts; verify motherboard keep-out zones before fitting to avoid interference with nearby components.

Přednosti

  • 13,300 rpm counter-rotating design moves 26.4 CFM through tight 1U spaces
  • 40 × 56 mm footprint fits dense server chassis without blocking adjacent slots
  • Six-pin connector enables PWM control for precise thermal management
  • Counter-rotating blades reduce vibration for quieter rack operation
  • 85 mm height clears low-profile memory and VRM heatsinks

Specifikace

BrandSUPERMICRO
TypeFan & Heatsinks
RPM1 x 13300 rpm
Air Flow1 x 26.4 CFM
Power Connector6-pin

Otázky k tomuto produktu

How often will the 13300 rpm counter-rotating fan need cleaning or bearing replacement?

The 13300 rpm counter-rotating fan has no published service interval; dust buildup on the 40x40x56 mm heatsink is the main factor that reduces airflow over time.

What thermal limit appears first when the cooler runs continuously at 26.4 CFM?

Sustained 26.4 CFM airflow is limited by the 1U height; the small fin stack saturates before the 6-pin power delivery reaches its ceiling.

How much noise and heat does the 13300 rpm fan produce during all-day operation?

At 13300 rpm the fan generates noticeable high-pitched noise; the 6-pin connector draws only the power needed for 26.4 CFM, so waste heat stays low.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.