Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black 40mm square case fan with four-pin connector

SXDOOL

SXDOOL 40mm 4-pin case fan >7000 RPM 25-30 CFM

SKU CH-WNH9-YZEH0

40 mm case fan spins above 7000 RPM for 25–30 CFM airflow at 25–30 dBA with a 4-pin connector

  • TypeCase Fan
  • Fan Size40mm
  • RPM>7000 RPM
  • Air Flow25-30 CFM
  • Noise Level25 - 30 dBA
  • Power Connector4 Pin
  • High airflow up to 30 CFM from a 40 mm frame
  • PWM 4-pin control keeps speeds above 7000 RPM precise
  • Quiet operation at 25-30 dBA even at full speed
  • Double ball bearing rated for 100000 hours continuous use
  • Compact 40x40x28 mm size fits tight server and SFF builds

40mm 4-pin server fan

The SXDOOL 40mm case fan is a 12 V PWM cooler designed for tight server chassis and compact workstations. Its 40 x 40 x 28 mm frame fits the standard 4028 mounting pattern used in many 1U and blade systems. Double ball bearings support a rated 100,000 hour operating life at continuous duty.

>7000 RPM airflow

At speeds above 7000 RPM the impeller delivers 25 to 30 CFM while drawing 8.0 W. The four pin connector provides PWM speed control and tachometer feedback so the system can balance cooling against acoustic limits. Measured noise sits between 25 and 30 dBA at full rate.

Suits high density builds

This fan suits integrators populating dense rack gear or refreshing legacy Sunon PMD1204PQBX-A slots where 40 mm depth is fixed. Builders needing larger diameter rotors, lower RPM ranges or different mounting hole spacings should look at other form factors.

Přednosti

  • High airflow up to 30 CFM from a 40 mm frame
  • PWM 4-pin control keeps speeds above 7000 RPM precise
  • Quiet operation at 25-30 dBA even at full speed
  • Double ball bearing rated for 100000 hours continuous use
  • Compact 40x40x28 mm size fits tight server and SFF builds

Specifikace

TypeCase Fan
Fan Size40mm
RPM>7000 RPM
Air Flow25-30 CFM
Noise Level25 - 30 dBA
Power Connector4 Pin

Otázky k tomuto produktu

What does the >7000 RPM rating deliver in a typical chassis?

The fan pushes 25-30 CFM through a 40 mm frame, so it suits tight server or workstation slots where high static pressure matters more than raw volume.

How does the 4-pin connector control speed in practice?

The PWM line lets the motherboard vary voltage from 0 to 12 V, so the motor spins only as fast as the thermal curve demands.

Will the 40 x 40 x 28 mm frame fit my 40 mm mounting holes?

Yes — the body matches the standard 40 mm square pattern and the 28 mm depth clears most low-profile brackets.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.