SXDOOL
SXDOOL 40mm 4-pin case fan >7000 RPM 25-30 CFM
40 mm case fan spins above 7000 RPM for 25–30 CFM airflow at 25–30 dBA with a 4-pin connector
- TypeCase Fan
- Fan Size40mm
- RPM>7000 RPM
- Air Flow25-30 CFM
- Noise Level25 - 30 dBA
- Power Connector4 Pin
- High airflow up to 30 CFM from a 40 mm frame
- PWM 4-pin control keeps speeds above 7000 RPM precise
- Quiet operation at 25-30 dBA even at full speed
- Double ball bearing rated for 100000 hours continuous use
- Compact 40x40x28 mm size fits tight server and SFF builds
40mm 4-pin server fan
The SXDOOL 40mm case fan is a 12 V PWM cooler designed for tight server chassis and compact workstations. Its 40 x 40 x 28 mm frame fits the standard 4028 mounting pattern used in many 1U and blade systems. Double ball bearings support a rated 100,000 hour operating life at continuous duty.
>7000 RPM airflow
At speeds above 7000 RPM the impeller delivers 25 to 30 CFM while drawing 8.0 W. The four pin connector provides PWM speed control and tachometer feedback so the system can balance cooling against acoustic limits. Measured noise sits between 25 and 30 dBA at full rate.
Suits high density builds
This fan suits integrators populating dense rack gear or refreshing legacy Sunon PMD1204PQBX-A slots where 40 mm depth is fixed. Builders needing larger diameter rotors, lower RPM ranges or different mounting hole spacings should look at other form factors.
Puntos fuertes
- High airflow up to 30 CFM from a 40 mm frame
- PWM 4-pin control keeps speeds above 7000 RPM precise
- Quiet operation at 25-30 dBA even at full speed
- Double ball bearing rated for 100000 hours continuous use
- Compact 40x40x28 mm size fits tight server and SFF builds
Especificaciones
| Type | Case Fan |
|---|---|
| Fan Size | 40mm |
| RPM | >7000 RPM |
| Air Flow | 25-30 CFM |
| Noise Level | 25 - 30 dBA |
| Power Connector | 4 Pin |
Preguntas sobre este artículo
What does the >7000 RPM rating deliver in a typical chassis?
The fan pushes 25-30 CFM through a 40 mm frame, so it suits tight server or workstation slots where high static pressure matters more than raw volume.
How does the 4-pin connector control speed in practice?
The PWM line lets the motherboard vary voltage from 0 to 12 V, so the motor spins only as fast as the thermal curve demands.
Will the 40 x 40 x 28 mm frame fit my 40 mm mounting holes?
Yes — the body matches the standard 40 mm square pattern and the 28 mm depth clears most low-profile brackets.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



