Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 120 mm square case fan with 25 mm frame, three-pin connector, no LED

SXDOOL

SXDOOL AD1212HB-A71GL 12025 12V .37A 2200 RPM 87.870 CFM 38 dBA 3-pin 2-ball case fan

SKU CH-Z5RH-VRNBX MPN AD1212HB-A71GL

A 120 mm case fan with double ball bearings, 2200 RPM, 87.870 CFM airflow and 38 dBA noise on a 3-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM2000-2499 RPM
  • Air Flow>80 CFM
  • Noise Level35 - 40 dBA
  • Power Connector3 Pin
  • 120 mm double ball bearing fan rated for 180 000 hours continuous operation
  • 3-pin connector enables motherboard speed monitoring and control
  • 2200 RPM delivers 87.870 CFM airflow for effective case cooling
  • 38 dBA noise level keeps acoustic output low under load
  • 12 V 0.37 A draw compatible with standard fan headers

120 mm double-ball-bearing case fan

The ADDA AD1212HB-A71GL is a 120 mm case fan built around a dual ball-bearing motor rated for 180 000 hours of continuous operation. It runs at 2 200 RPM from a 12 V supply drawing 0.37 A and connects via a standard three-pin header that reports speed to the motherboard. No LED lighting is fitted. The black frame measures 120 mm by 120 mm by 25 mm.

Builders who need measured airflow

This fan suits system integrators and enthusiasts who want a reliable high-static-pressure cooler for dense heatsinks or restricted intake paths. The dual ball bearings and published 180 000-hour MTBF target continuous-duty servers or workstations. Buyers who require PWM speed control, addressable lighting or noise levels below 35 dBA should look elsewhere.

87.87 CFM at 38 dBA with three-pin speed reporting

The combination of 87.87 CFM airflow and 38 dBA acoustic output at 2 200 RPM is the single figure that determines fit. If your thermal design demands that specific air-volume-to-noise ratio and a three-pin tachometer signal, the AD1212HB-A71GL matches the requirement; otherwise a different airflow or connector type is needed.

Přednosti

  • 120 mm double ball bearing fan rated for 180 000 hours continuous operation
  • 3-pin connector enables motherboard speed monitoring and control
  • 2200 RPM delivers 87.870 CFM airflow for effective case cooling
  • 38 dBA noise level keeps acoustic output low under load
  • 12 V 0.37 A draw compatible with standard fan headers

Specifikace

TypeCase Fan
Bearing Type2 Ball
RPM2000-2499 RPM
Air Flow>80 CFM
Noise Level35 - 40 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED

Otázky k tomuto produktu

How much air does 87.870 CFM actually move inside a case?

At 2200 RPM the fan pushes 87.870 CFM, delivering strong airflow for CPU coolers or high-restriction radiators while producing 38 dBA.

What does the 3-pin connector limit for speed control?

The 3-pin header supports RPM monitoring but voltage regulation is required for speed changes; PWM control is not available.

Will the 120 mm by 25 mm frame fit my case mounts?

The 120 mm square by 25 mm thick frame matches standard 120 mm mounting holes for case panels or radiators.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.