暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SXDOOL

SXDOOL AD1212HB-A71GL 12025 12V .37A 2200 RPM 87.870 CFM 38 dBA 3-pin 2-ball case fan

SKU CH-Z5RH-VRNBX MPN AD1212HB-A71GL

A 120 mm case fan with double ball bearings, 2200 RPM, 87.870 CFM airflow and 38 dBA noise on a 3-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM2000-2499 RPM
  • Air Flow>80 CFM
  • Noise Level35 - 40 dBA
  • Power Connector3 Pin
  • 120 mm double ball bearing fan rated for 180 000 hours continuous operation
  • 3-pin connector enables motherboard speed monitoring and control
  • 2200 RPM delivers 87.870 CFM airflow for effective case cooling
  • 38 dBA noise level keeps acoustic output low under load
  • 12 V 0.37 A draw compatible with standard fan headers

120 mm double-ball-bearing case fan

The ADDA AD1212HB-A71GL is a 120 mm case fan built around a dual ball-bearing motor rated for 180 000 hours of continuous operation. It runs at 2 200 RPM from a 12 V supply drawing 0.37 A and connects via a standard three-pin header that reports speed to the motherboard. No LED lighting is fitted. The black frame measures 120 mm by 120 mm by 25 mm.

Builders who need measured airflow

This fan suits system integrators and enthusiasts who want a reliable high-static-pressure cooler for dense heatsinks or restricted intake paths. The dual ball bearings and published 180 000-hour MTBF target continuous-duty servers or workstations. Buyers who require PWM speed control, addressable lighting or noise levels below 35 dBA should look elsewhere.

87.87 CFM at 38 dBA with three-pin speed reporting

The combination of 87.87 CFM airflow and 38 dBA acoustic output at 2 200 RPM is the single figure that determines fit. If your thermal design demands that specific air-volume-to-noise ratio and a three-pin tachometer signal, the AD1212HB-A71GL matches the requirement; otherwise a different airflow or connector type is needed.

特長

  • 120 mm double ball bearing fan rated for 180 000 hours continuous operation
  • 3-pin connector enables motherboard speed monitoring and control
  • 2200 RPM delivers 87.870 CFM airflow for effective case cooling
  • 38 dBA noise level keeps acoustic output low under load
  • 12 V 0.37 A draw compatible with standard fan headers

仕様

TypeCase Fan
Bearing Type2 Ball
RPM2000-2499 RPM
Air Flow>80 CFM
Noise Level35 - 40 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED

この商品に関する質問

How much air does 87.870 CFM actually move inside a case?

At 2200 RPM the fan pushes 87.870 CFM, delivering strong airflow for CPU coolers or high-restriction radiators while producing 38 dBA.

What does the 3-pin connector limit for speed control?

The 3-pin header supports RPM monitoring but voltage regulation is required for speed changes; PWM control is not available.

Will the 120 mm by 25 mm frame fit my case mounts?

The 120 mm square by 25 mm thick frame matches standard 120 mm mounting holes for case panels or radiators.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。