Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black flatbed SATA duplicator with 19 drive slots and LCD display

Systor

Systor 1:19 Flatbed SATA Duplicator & Sanitizer (SYS19-SSD-SATA2)

SKU CH-H3F0-VD23J

Duplicates up to 19 SATA drives at once with 300 MB/s transfer speed and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 19
  • Buffer Memory128 MB
  • Data Transfer Rate300MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

DATA TRANSFER RATE Flatbed - 18.0GB/min [300MB/sec]

Přeškrtnuté varianty existují, ale zde nejsou skladem.

TARGET SIZE 1 to 19

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copies 19 drives at once from one source
  • 18 GB/min throughput with 300 MB/s transfer rate
  • Standalone operation — no computer or software required
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Supports 2.5" SSD and 3.5" HDD in the same bays

1-to-19 SATA duplicator for IT teams

The Systor 1:19 flatbed unit copies and sanitises up to nineteen SATA drives simultaneously. It accepts both 2.5 and 3.5 form-factor disks without a host computer. The standalone design suits service centres, forensic labs and bulk-deployment teams that need repeatable results.

300 MB/s sustained copy throughput

A 128 MB buffer feeds nineteen target ports at a rated 300 MB per second. The single specification that decides fit is this aggregate bandwidth; if your workflow demands higher per-drive speed, the platform will not meet it. No software configuration is required to reach the rated rate.

Active cooling sustains long runs

Dual 300 W supplies and per-port 40 mm exhaust fans keep temperatures stable during multi-hour DoD 5220.22-M erase cycles. The hardware maintains the rated transfer rate across full media copies without thermal throttling. Continuous operation is supported by the 600 W redundant power design.

Přednosti

  • Copies 19 drives at once from one source
  • 18 GB/min throughput with 300 MB/s transfer rate
  • Standalone operation — no computer or software required
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Supports 2.5" SSD and 3.5" HDD in the same bays

Specifikace

BrandSystor
TypeHard Drive Duplicator
Target1 to 19
Buffer Memory128 MB
Data Transfer Rate300MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)
Package Contentssee pictures for details

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 18 GB/min figure mean when the duplicator is running?

It means the unit can write up to 18 GB of data each minute across all active SATA ports, so total throughput scales with the number of target drives connected.

What does the SATA interface and 300 MB/s transfer rate cap in practice?

The SATA connector and 300 MB/s rate limit each port to SATA 2.0 speeds, so even faster SSDs will not exceed that ceiling during copy or erase operations.

What physical space and drive sizes are needed to fit the duplicator and its bays?

The flatbed unit accepts both 2.5 and 3.5 SATA drives in slot-load bays and requires a standard 115/230 V, 50/60 Hz outlet for its dual 300 W power supplies.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.