Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black flatbed SATA duplicator with 19 drive slots and LCD display

Systor

Systor 1:19 Flatbed SATA Duplicator & Sanitizer (SYS19-SSD-SATA2)

SKU CH-H3F0-VD23J

Duplicates up to 19 SATA drives at once with 300 MB/s transfer speed and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 19
  • Buffer Memory128 MB
  • Data Transfer Rate300MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

DATA TRANSFER RATE Flatbed - 18.0GB/min [300MB/sec]

As versões riscadas existem, mas não estão disponíveis aqui.

TARGET SIZE 1 to 19

As versões riscadas existem, mas não estão disponíveis aqui.

  • Copies 19 drives at once from one source
  • 18 GB/min throughput with 300 MB/s transfer rate
  • Standalone operation — no computer or software required
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Supports 2.5" SSD and 3.5" HDD in the same bays

1-to-19 SATA duplicator for IT teams

The Systor 1:19 flatbed unit copies and sanitises up to nineteen SATA drives simultaneously. It accepts both 2.5 and 3.5 form-factor disks without a host computer. The standalone design suits service centres, forensic labs and bulk-deployment teams that need repeatable results.

300 MB/s sustained copy throughput

A 128 MB buffer feeds nineteen target ports at a rated 300 MB per second. The single specification that decides fit is this aggregate bandwidth; if your workflow demands higher per-drive speed, the platform will not meet it. No software configuration is required to reach the rated rate.

Active cooling sustains long runs

Dual 300 W supplies and per-port 40 mm exhaust fans keep temperatures stable during multi-hour DoD 5220.22-M erase cycles. The hardware maintains the rated transfer rate across full media copies without thermal throttling. Continuous operation is supported by the 600 W redundant power design.

Pontos fortes

  • Copies 19 drives at once from one source
  • 18 GB/min throughput with 300 MB/s transfer rate
  • Standalone operation — no computer or software required
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Supports 2.5" SSD and 3.5" HDD in the same bays

Especificações

BrandSystor
TypeHard Drive Duplicator
Target1 to 19
Buffer Memory128 MB
Data Transfer Rate300MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)
Package Contentssee pictures for details

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What does the 18 GB/min figure mean when the duplicator is running?

It means the unit can write up to 18 GB of data each minute across all active SATA ports, so total throughput scales with the number of target drives connected.

What does the SATA interface and 300 MB/s transfer rate cap in practice?

The SATA connector and 300 MB/s rate limit each port to SATA 2.0 speeds, so even faster SSDs will not exceed that ceiling during copy or erase operations.

What physical space and drive sizes are needed to fit the duplicator and its bays?

The flatbed unit accepts both 2.5 and 3.5 SATA drives in slot-load bays and requires a standard 115/230 V, 50/60 Hz outlet for its dual 300 W power supplies.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.