Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Clear acrylic reservoir with integrated pump, rectangular block, 247 by 81 by 65.9 mm, 400 ml capacity, three G 1/4 ports

Thermaltake

Thermaltake CL-W001-PL00BL-A Pacific PT40 Pump + Tank 400ml POM+PMMA diy cooling

SKU CH-0ZRG-WTRNB MPN CL-W001-PL00BL-A

An integrated reservoir and pump unit holds 400 ml of coolant and delivers 500 L/hr flow in a 247 mm POM and PMMA body

  • TypePump
  • Block MaterialPOM+ PMMA
  • Pump Dim.247mm (L) x 81mm (W) x 65.9mm (H)
  • Pump Capacity400 ml
  • FeaturesCombo Reservoir and Pump all-in-one Support (3) G 1/4 Thread
  • Package ContentsPT40 Reservoir + Pump Reservoir Mounting Clamp x2 3-pin exte
  • All-in-one reservoir and pump simplifies custom loop builds
  • 400 ml capacity extends time between coolant refills
  • 500 L/hr flow rate delivers strong circulation for efficient heat transfer
  • Vertical or horizontal mounting fits diverse case layouts
  • Three G 1/4 ports enable flexible tubing routing

Pacific PT40 Pump and Tank Unit

The Thermaltake CL-W001-PL00BL-A combines a pump and 400 ml reservoir in a single POM and PMMA body. It is built for DIY liquid-cooling builders who want an integrated unit that reduces tubing runs and simplifies loop planning. The clear acrylic tank lets users monitor coolant level and flow at a glance. It suits compact or custom configurations where space is limited.

Three G 1/4 Thread Ports and Mounting Options

The unit provides three G 1/4 ports for standard fitting connections. It supports both vertical and horizontal mounting using the two included reservoir clamps. A 3-pin extension cable, screws, nuts, velcro pad, zip-ties, a wrench and an Allen tool are supplied for installation. The 247 mm length and 81 mm width define the footprint required in the case.

400 ml Capacity with 500 L/hr Flow

The 400 ml tank holds enough coolant for most small-form-factor loops while leaving headroom for expansion. The pump delivers 500 L/hr, which circulates fluid effectively through CPU and GPU blocks in typical single-loop builds. Very large loops with multiple radiators and long tubing runs may exceed the practical flow headroom of this pump. Builders planning extensive multi-component loops should verify flow requirements before committing.

Přednosti

  • All-in-one reservoir and pump simplifies custom loop builds
  • 400 ml capacity extends time between coolant refills
  • 500 L/hr flow rate delivers strong circulation for efficient heat transfer
  • Vertical or horizontal mounting fits diverse case layouts
  • Three G 1/4 ports enable flexible tubing routing

Specifikace

BrandThermaltake
ModelCL-W001-PL00BL-A
TypePump
Block MaterialPOM+ PMMA
Pump Dim.247mm (L) x 81mm (W) x 65.9mm (H)
Pump Capacity400 ml
FeaturesCombo Reservoir and Pump all-in-one
Support (3) G 1/4 Thread Ports
Capable of Vertical or Horizontal Mounting
Crystal Clear PMMA Acrylic
Package ContentsPT40 Reservoir + Pump
Reservoir Mounting Clamp x2
3-pin extension cable included
(4) Screws/Nuts for Mounting with velcro pad
(4) Zip-ties
(1) Wrench Tool, (1) Allen Tool
User Guide
Přepravní hmotnost0.82 kg
Rozměry balení310 × 102 × 79 mm

Otázky k tomuto produktu

How do I choose between a vertical or horizontal mount for the PT40 pump and tank?

Both orientations are supported. Use the two included mounting clamps and the supplied screws, nuts, velcro pad and zip-ties to secure the 247 mm by 81 mm by 65.9 mm unit in the orientation that fits your loop layout.

What does the 500 L/hr pump performance mean for my custom loop?

The 500 L/hr rating is the maximum flow the pump can deliver. Actual flow in your loop will be lower once you add blocks, radiators and tubing, but the figure shows the pump has headroom for typical single-loop builds.

What fittings work with the three G 1/4 thread ports?

Any standard G 1/4 threaded fitting — compression, barbed or rotary — will screw directly into the three ports. The package includes a wrench and an Allen tool to tighten them without damaging the POM and PMMA housing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.