Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black clamshell heat press 15 by 12 inches with swing-away arm and LCD panel

VEVOR

VEVOR P8100 15x12 in 3D printers accessory heat press

SKU CH-VDED-VKWMB MPN P8100

Multifunctional 15x12 in clamshell heat press with 11 interchangeable platens for shirts, hats, mugs, plates, pens and shoes, 360° swing-away arm, dual-tube heating and digital LCD controls

  • TypeOther Appliances
  • Precise temperature control with LCD digital display and memory presets
  • Even pressure across the platen from the 360° swing-away arm
  • Consistent heat distribution via dual-tube heating with a 5 °F centre-to-edge difference
  • Eight interchangeable pads cover hats, mugs, plates, pots, pens and shoes
  • 800 W power heats the 15×12 in platen up to 410 °F / 210 °C

11-in-1 Heat Press for Makers

The VEVOR P8100 is a 15 x 12 inch clamshell heat press designed for sublimation transfers on flat and curved blanks. It ships fully assembled with eleven interchangeable pads covering hats, mugs, plates, pots, pens and shoes. Digital dual-tube heating and a 360° swing-away arm provide even temperature distribution and safe element positioning.

Suited for multi-blank workshops.

Crafters who switch between apparel, drinkware and accessories benefit from the quick-change pads and stored presets. The 38 x 30 cm platen limits full-shirt graphics to smaller layouts. Buyers needing continuous roll feeding or automatic pressure should look at dedicated industrial equipment.

Handles 15 x 12 in transfers

Dual tubes hold the set temperature up to 210 °C across the aluminium platen. Eight-, ten-inch plates and 6-to-12 oz mugs press evenly. Larger garments exceeding the platen dimensions require section pressing. The 800 W heater recovers quickly between cycles for batch runs.

Přednosti

  • Precise temperature control with LCD digital display and memory presets
  • Even pressure across the platen from the 360° swing-away arm
  • Consistent heat distribution via dual-tube heating with a 5 °F centre-to-edge difference
  • Eight interchangeable pads cover hats, mugs, plates, pots, pens and shoes
  • 800 W power heats the 15×12 in platen up to 410 °F / 210 °C

Specifikace

TypeOther Appliances

Otázky k tomuto produktu

What type of electrical outlet and circuit do I need for the 800 W press?

The machine draws 800 W at 50-60 Hz, so a standard household socket on a circuit that can supply that power is required.

Will the 360° swing-away arm clear my existing 38 x 30 cm work surface when rotated?

The swing-away design moves the heating element safely to the side; the unit footprint is 38 x 45 cm, so allow at least that much clear space.

How can I verify the dual-tube heating is giving an even temperature across the 15 x 12 in platen?

The controller shows the set temperature in °C or °F; the spec states the centre-to-edge difference is about 5 degrees, so a surface probe should read within that range.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.