Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black USB 3.0 duplicator tower with 63 target ports and 20 x 2 blue LCD display

VinPower

VinPower USBSHARK-63T-BK 1-63 target USB 3.0 duplicator

SKU CH-57K9-ZTCZG MPN USBSHARK-63T-BK

Standalone USB 3.0 duplicator copies one master to 63 targets asynchronously with 128M buffer and 20×2 LCD

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorUSB 3.0

Target 1 to 63

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Standalone operation — no PC required to run duplication tasks
  • Asynchronous copying — each of 63 targets writes independently at full speed
  • 128 MB buffer — sustains throughput during high-volume copy jobs
  • 20×2 blue LCD — shows real-time status for every port
  • Wide-range 90–240 V AC power — works worldwide without a voltage selector

Standalone USB 3.0 flash duplicator

The VinPower USBSHARK-63T-BK is a tower duplicator that copies one master USB flash drive to up to 63 targets at once. It runs without a host computer and uses a 128 MB buffer to sustain asynchronous transfers across all ports. A 20 x 2 blue LCD shows progress and status for each slot.

High-volume duplication for IT and production teams

This unit suits organisations that need to provision large batches of USB media quickly and independently. It is not for users who only duplicate a few drives at a time or who require direct PC control over each copy job. The standalone design also means it cannot be scripted from a workstation.

63 simultaneous targets with 128 MB buffer

The duplicator handles up to 63 USB 3.0 devices in a single session while the buffer smooths data flow across asynchronous channels. Throughput per port will vary with the speed class of the attached flash drives. Power input accepts 90 to 240 V AC for worldwide deployment.

Přednosti

  • Standalone operation — no PC required to run duplication tasks
  • Asynchronous copying — each of 63 targets writes independently at full speed
  • 128 MB buffer — sustains throughput during high-volume copy jobs
  • 20×2 blue LCD — shows real-time status for every port
  • Wide-range 90–240 V AC power — works worldwide without a voltage selector

Specifikace

BrandVINPOWER
ModelUSBSHARK-63T-BK
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorUSB 3.0
Panel ColorBlack
Dimensions (H x W x D)33.00" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the USB device.
Supports all data Formats with bit by bit duplication
Supports most currently available USB drive:
Supports most currently available USB drive in the market
Future functions upgradeable through firmware:
Power Supply90 - 240 V AC
Přepravní hmotnost22.59 kg
Rozměry balení965 × 660 × 305 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Do I need a computer to operate the USBSHARK-63T-BK duplicator?

No, the duplicator runs standalone with its own 20 x 2 blue LCD and 128M buffer memory so no PC is required.

Can I keep using my existing USB 2.0 flash drives with this USB 3.0 duplicator?

Yes, the USB 3.0 ports are backward compatible so older USB 2.0 drives will copy at their own speed.

How can I verify the USBSHARK-63T-BK copied all 63 targets correctly?

The 20 x 2 blue LCD shows pass or fail status for each of the 63 target ports after the asynchronous duplication finishes.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.