暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black USB 3.0 duplicator tower with 63 target ports and 20 x 2 blue LCD display

VinPower

VinPower USBSHARK-63T-BK 1-63 target USB 3.0 duplicator

SKU CH-57K9-ZTCZG MPN USBSHARK-63T-BK

Standalone USB 3.0 duplicator copies one master to 63 targets asynchronously with 128M buffer and 20×2 LCD

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorUSB 3.0

Target 1 to 63

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation — no PC required to run duplication tasks
  • Asynchronous copying — each of 63 targets writes independently at full speed
  • 128 MB buffer — sustains throughput during high-volume copy jobs
  • 20×2 blue LCD — shows real-time status for every port
  • Wide-range 90–240 V AC power — works worldwide without a voltage selector

Standalone USB 3.0 flash duplicator

The VinPower USBSHARK-63T-BK is a tower duplicator that copies one master USB flash drive to up to 63 targets at once. It runs without a host computer and uses a 128 MB buffer to sustain asynchronous transfers across all ports. A 20 x 2 blue LCD shows progress and status for each slot.

High-volume duplication for IT and production teams

This unit suits organisations that need to provision large batches of USB media quickly and independently. It is not for users who only duplicate a few drives at a time or who require direct PC control over each copy job. The standalone design also means it cannot be scripted from a workstation.

63 simultaneous targets with 128 MB buffer

The duplicator handles up to 63 USB 3.0 devices in a single session while the buffer smooths data flow across asynchronous channels. Throughput per port will vary with the speed class of the attached flash drives. Power input accepts 90 to 240 V AC for worldwide deployment.

特長

  • Standalone operation — no PC required to run duplication tasks
  • Asynchronous copying — each of 63 targets writes independently at full speed
  • 128 MB buffer — sustains throughput during high-volume copy jobs
  • 20×2 blue LCD — shows real-time status for every port
  • Wide-range 90–240 V AC power — works worldwide without a voltage selector

仕様

BrandVINPOWER
ModelUSBSHARK-63T-BK
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorUSB 3.0
Panel ColorBlack
Dimensions (H x W x D)33.00" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the USB device.
Supports all data Formats with bit by bit duplication
Supports most currently available USB drive:
Supports most currently available USB drive in the market
Future functions upgradeable through firmware:
Power Supply90 - 240 V AC
配送重量22.59 kg
梱包サイズ965 × 660 × 305 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Do I need a computer to operate the USBSHARK-63T-BK duplicator?

No, the duplicator runs standalone with its own 20 x 2 blue LCD and 128M buffer memory so no PC is required.

Can I keep using my existing USB 2.0 flash drives with this USB 3.0 duplicator?

Yes, the USB 3.0 ports are backward compatible so older USB 2.0 drives will copy at their own speed.

How can I verify the USBSHARK-63T-BK copied all 63 targets correctly?

The 20 x 2 blue LCD shows pass or fail status for each of the 63 target ports after the asynchronous duplication finishes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。