VisionTek
VisionTek 901560 DLX4 2 TB M.2 2230 NVMe internal SSD
M.2 2230 2 TB NVMe drive with 4985 MB/s reads, 4775 MB/s writes and 1000 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2230
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- M.2 2230 form factor fits slim laptops and handheld PCs
- PCIe 4.0 x4 NVMe 1.4 delivers 4985 MB/s sequential read and 4775 MB/s sequential write
- 195K random read and 289K random write IOPS accelerate everyday workloads
- 1000 TBW endurance rating supports heavy write cycles
- TCG Opal 2.0 encryption secures data at rest
VisionTek DLX4 2 TB M.2 2230 NVMe SSD
The VisionTek DLX4 is a 2 TB internal solid-state drive built in the M.2 2230 form factor. It connects through a PCI Express 4.0 x4 interface using the NVMe 1.4 protocol. The drive is intended for consumer systems that need compact, high-capacity storage.
Sustained performance
Under continuous workloads the Innogrit IG5220 controller manages heat and write amplification through Dynamic and Static Wear Leveling, Garbage Collection and Global Wear Leveling. SLC cache and Data Shaping help absorb bursts before the 3D NAND settles to steady-state throughput. The drive draws 4.75 W active and 0.3 W idle while operating between 0 °C and 70 °C.
PCIe 4.0 x4 practical limits
The PCIe 4.0 x4 link caps sequential transfer at 4985 MB/s read and 4775 MB/s write. Random 4 KB performance reaches 195 K IOPS read and 289 K IOPS write. Endurance is rated at 1000 TBW with a 1,500,000-hour MTBF. TCG Opal Encryption 2.0 and 256-bit AES protect data at rest without host software overhead.
Přednosti
- M.2 2230 form factor fits slim laptops and handheld PCs
- PCIe 4.0 x4 NVMe 1.4 delivers 4985 MB/s sequential read and 4775 MB/s sequential write
- 195K random read and 289K random write IOPS accelerate everyday workloads
- 1000 TBW endurance rating supports heavy write cycles
- TCG Opal 2.0 encryption secures data at rest
Specifikace
| Brand | VisionTek |
|---|---|
| Series | DLX4 |
| Model | DLX4 |
| Part Number | 901560 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2230 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Controller | Innogrit IG5220 |
| Encryption | TCG Opal Encryption 2.0 |
| Max Sequential Read | 4985 MB/s |
| Max Sequential Write | 4775 MB/s |
| 4KB Random Read | 195K IOPS |
| 4KB Random Write | 289K IOPS |
| Terabytes Written (TBW) | 1000TB |
| MTBF | 1,500,000 hours |
| Features | 3D NAND Technology, Data Shaping, Dynamic and Static Wear Leveling, ECC Recovery LDPC, Garbage Collection technology, Global Wear Leveling, Host Memory Buffer (HMB), Low-Density Parity Check, SLC cache, StaticDataRefresh Technology |
| Power Consumption (Idle) | 0.3W (Idle) |
| Power Consumption (Active) | 4.75W (Active) |
| Operating Temperature | 0-70°C |
| Storage Temperature | -40-85°C |
| Operating Humidity | 5 - 95% |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 2-500Hz, 3.1G |
| Weight | 7g |
| Přepravní hmotnost | 0.11 kg |
| Rozměry balení | 133 × 102 × 10 mm |
Otázky k tomuto produktu
How much power does the VisionTek DLX4 2 TB draw when active all day?
The drive uses 4.75 W during active operation and 0.3 W at idle, with an operating temperature range of 0-70 °C.
What slot and key does the M.2 2230 DLX4 need on my motherboard?
It requires an M.2 2230 slot wired for PCI-Express 4.0 x4 and NVMe 1.4 protocol.
Will the DLX4 run at PCIe 4.0 speeds in my older PCIe 3.0 system?
The drive is backward compatible with PCIe 3.0 x4 slots, though sequential speeds will be limited to the 3.0 bus ceiling.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
