Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black controller and silver label, M.2 2280 stick form factor

VisionTek

VisionTek DLX3 901555 512GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD

SKU CH-2YEZ-Z23K0 MPN 901555

512GB M.2 2280 NVMe SSD with PCIe 3.0 x4 interface delivering 3300MB/s reads and 2900MB/s writes

  • Device TypeExternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity512GB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Fast boot and load times with sequential reads up to 3300 MB/s
  • Responsive multitasking from random reads up to 370K IOPS
  • Quick file saves and installs via sequential writes up to 2900 MB/s
  • Low idle draw of 0.3W extends laptop battery life
  • Operates reliably from 0°C to 70°C for everyday use

VisionTek DLX3 512GB NVMe SSD

The VisionTek DLX3 512GB M.2 2280 drive uses a PCIe 3.0 x4 interface and NVMe 1.3 protocol. It is built with 3D NAND flash and an InnoGrit IG5216 controller for consumer workloads. Sequential reads reach 3300 MBps and writes reach 2900 MBps.

Fits M.2 2280 slots with PCIe 3.0 x4 wiring

The 2280 form factor installs directly into a compatible motherboard or laptop slot without cables. The NVMe protocol removes the overhead of older storage interfaces. Idle power draw is 0.3W, leaving more of the system power budget for other components.

Sustained performance within 0°C to 70°C operating

Random 4K reads hit 370K IOPS and writes hit 288K IOPS under load. Active power consumption is 4.75W while the controller manages thermal conditions. The drive is rated for storage temperatures from -40°C to 85°C when not powered.

Přednosti

  • Fast boot and load times with sequential reads up to 3300 MB/s
  • Responsive multitasking from random reads up to 370K IOPS
  • Quick file saves and installs via sequential writes up to 2900 MB/s
  • Low idle draw of 0.3W extends laptop battery life
  • Operates reliably from 0°C to 70°C for everyday use

Specifikace

BrandVisionTek
SeriesDLX3
Model2280
Part Number901555
Device TypeExternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity512GB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
ControllerInnoGrit
Max Sequential ReadUp to 3300 MBps
Max Sequential WriteUp to 2900 MBps
4KB Random ReadUp to 370K IOPS
4KB Random WriteUp to 288K IOPS
Power Consumption (Idle)0.3W
Power Consumption (Active)4.75W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Přepravní hmotnost0.23 kg
Rozměry balení178 × 76 × 25 mm

Otázky k tomuto produktu

At what temperature does the drive hit its operating limit during sustained heavy use?

The DLX3 is rated for an operating range up to 70°C; sustained workloads that push the controller beyond that threshold will trigger thermal throttling to protect the NAND and InnoGrit IG5216 controller.

How much power and heat does the SSD produce when running all day?

Active power draw is 4.75W and idle draw is .3W, so continuous operation adds modest heat inside the chassis — ensure the M.2 slot has adequate airflow or a motherboard heatsink.

What host interface and keying must my system provide for this M.2 2280 module to work?

The drive requires an M-key M.2 slot wired for PCI-Express 3.0 x4 with NVMe 1.3 support; it will not operate in slots that only provide PCIe x2 or x1 electrical connections.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.