VisionTek
VisionTek DLX3 901555 512GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD
512GB M.2 2280 NVMe SSD with PCIe 3.0 x4 interface delivering 3300MB/s reads and 2900MB/s writes
- Device TypeExternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity512GB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
- Fast boot and load times with sequential reads up to 3300 MB/s
- Responsive multitasking from random reads up to 370K IOPS
- Quick file saves and installs via sequential writes up to 2900 MB/s
- Low idle draw of 0.3W extends laptop battery life
- Operates reliably from 0°C to 70°C for everyday use
VisionTek DLX3 512GB NVMe SSD
The VisionTek DLX3 512GB M.2 2280 drive uses a PCIe 3.0 x4 interface and NVMe 1.3 protocol. It is built with 3D NAND flash and an InnoGrit IG5216 controller for consumer workloads. Sequential reads reach 3300 MBps and writes reach 2900 MBps.
Fits M.2 2280 slots with PCIe 3.0 x4 wiring
The 2280 form factor installs directly into a compatible motherboard or laptop slot without cables. The NVMe protocol removes the overhead of older storage interfaces. Idle power draw is 0.3W, leaving more of the system power budget for other components.
Sustained performance within 0°C to 70°C operating
Random 4K reads hit 370K IOPS and writes hit 288K IOPS under load. Active power consumption is 4.75W while the controller manages thermal conditions. The drive is rated for storage temperatures from -40°C to 85°C when not powered.
Puntos fuertes
- Fast boot and load times with sequential reads up to 3300 MB/s
- Responsive multitasking from random reads up to 370K IOPS
- Quick file saves and installs via sequential writes up to 2900 MB/s
- Low idle draw of 0.3W extends laptop battery life
- Operates reliably from 0°C to 70°C for everyday use
Especificaciones
| Brand | VisionTek |
|---|---|
| Series | DLX3 |
| Model | 2280 |
| Part Number | 901555 |
| Device Type | External Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Controller | InnoGrit |
| Max Sequential Read | Up to 3300 MBps |
| Max Sequential Write | Up to 2900 MBps |
| 4KB Random Read | Up to 370K IOPS |
| 4KB Random Write | Up to 288K IOPS |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Peso de envío | 0.23 kg |
| Dimensiones del paquete | 178 × 76 × 25 mm |
Preguntas sobre este artículo
At what temperature does the drive hit its operating limit during sustained heavy use?
The DLX3 is rated for an operating range up to 70°C; sustained workloads that push the controller beyond that threshold will trigger thermal throttling to protect the NAND and InnoGrit IG5216 controller.
How much power and heat does the SSD produce when running all day?
Active power draw is 4.75W and idle draw is .3W, so continuous operation adds modest heat inside the chassis — ensure the M.2 slot has adequate airflow or a motherboard heatsink.
What host interface and keying must my system provide for this M.2 2280 module to work?
The drive requires an M-key M.2 slot wired for PCI-Express 3.0 x4 with NVMe 1.3 support; it will not operate in slots that only provide PCIe x2 or x1 electrical connections.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



