Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 2.5 inch SAS SATA drive caddy with metal frame and ABS plastic handle

Vszerda

Vszerda 8FKXC 2.5" SAS SATA hard drive adapter

SKU CH-12SJ-SW1C8

A 2.5-inch SAS/SATA drive caddy with metal frame and ABS handle, compatible with Dell PowerEdge and PowerVault servers

  • ColorBlack
  • Dimensions17.0 in x 10.0 in x 3.0 in
  • Weight0.059 kilograms
  • Package ContentsHard Drive Caddy x1
  • Fits 2.5" SAS and SATA drives in Dell PowerEdge servers
  • Metal frame with ABS corbel resists deformation during hot-swap use
  • Supports 11th, 12th, 13th and 14th generation PowerEdge and PowerVault models
  • Includes mounting screws for secure drive installation
  • Weighs 0.059 kg for lightweight rack density

Server drive bracket for Dell PowerEdge

This 2.5-inch SAS/SATA caddy fits Dell PowerEdge servers from the 11th through 14th generations and PowerVault storage arrays. It mounts a single hot-swap drive in the front-accessible bay of supported rack and tower systems. The tray is built from metal with ABS plastic corbels for rigidity.

Part numbers 08FKXC G176J 0G176J G281D 0G281D WX387

Compatibility is defined by the Dell part numbers listed above; the bracket works with any 2.5-inch SAS or SATA drive that matches the server’s backplane. Verify the part number on your existing caddy or chassis documentation before ordering.

Passive thermal path no fan no power draw

The caddy adds no active cooling and draws no power; it relies on the server’s internal airflow to move heat from the drive to the chassis. Noise and thermals are therefore identical to the original Dell tray in the same slot.

Přednosti

  • Fits 2.5" SAS and SATA drives in Dell PowerEdge servers
  • Metal frame with ABS corbel resists deformation during hot-swap use
  • Supports 11th, 12th, 13th and 14th generation PowerEdge and PowerVault models
  • Includes mounting screws for secure drive installation
  • Weighs 0.059 kg for lightweight rack density

Specifikace

BrandHeretom
ColorBlack
Dimensions17.0 in x 10.0 in x 3.0 in
Weight0.059 kilograms
Package ContentsHard Drive Caddy x1

Otázky k tomuto produktu

Will a 2.5" SATA SSD work in this tray when it is installed in a PowerEdge R730?

Yes, the tray accepts 2.5" SAS or SATA drives and is listed as compatible with the PowerEdge R730 among other 13th and 14th generation servers.

Does the SAS backplane limit the drive speed to 6 Gb/s when a SATA SSD is used?

The tray provides a SAS hardware interface; a SATA drive will run at its native SATA speed, which is typically 6 Gb/s for modern SSDs.

What mounting holes does the caddy use to secure the 2.5" drive?

Four mount screws are included and the tray body is metal with ABS corbels, matching the standard 2.5" drive hole pattern.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.