نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 2.5 inch SAS SATA drive caddy with metal frame and ABS plastic handle

Vszerda

Vszerda 8FKXC 2.5" SAS SATA hard drive adapter

SKU CH-12SJ-SW1C8

A 2.5-inch SAS/SATA drive caddy with metal frame and ABS handle, compatible with Dell PowerEdge and PowerVault servers

  • ColorBlack
  • Dimensions17.0 in x 10.0 in x 3.0 in
  • Weight0.059 kilograms
  • Package ContentsHard Drive Caddy x1
  • Fits 2.5" SAS and SATA drives in Dell PowerEdge servers
  • Metal frame with ABS corbel resists deformation during hot-swap use
  • Supports 11th, 12th, 13th and 14th generation PowerEdge and PowerVault models
  • Includes mounting screws for secure drive installation
  • Weighs 0.059 kg for lightweight rack density

Server drive bracket for Dell PowerEdge

This 2.5-inch SAS/SATA caddy fits Dell PowerEdge servers from the 11th through 14th generations and PowerVault storage arrays. It mounts a single hot-swap drive in the front-accessible bay of supported rack and tower systems. The tray is built from metal with ABS plastic corbels for rigidity.

Part numbers 08FKXC G176J 0G176J G281D 0G281D WX387

Compatibility is defined by the Dell part numbers listed above; the bracket works with any 2.5-inch SAS or SATA drive that matches the server’s backplane. Verify the part number on your existing caddy or chassis documentation before ordering.

Passive thermal path no fan no power draw

The caddy adds no active cooling and draws no power; it relies on the server’s internal airflow to move heat from the drive to the chassis. Noise and thermals are therefore identical to the original Dell tray in the same slot.

أبرز المميزات

  • Fits 2.5" SAS and SATA drives in Dell PowerEdge servers
  • Metal frame with ABS corbel resists deformation during hot-swap use
  • Supports 11th, 12th, 13th and 14th generation PowerEdge and PowerVault models
  • Includes mounting screws for secure drive installation
  • Weighs 0.059 kg for lightweight rack density

المواصفات

BrandHeretom
ColorBlack
Dimensions17.0 in x 10.0 in x 3.0 in
Weight0.059 kilograms
Package ContentsHard Drive Caddy x1

أسئلة حول هذا المنتج

Will a 2.5" SATA SSD work in this tray when it is installed in a PowerEdge R730?

Yes, the tray accepts 2.5" SAS or SATA drives and is listed as compatible with the PowerEdge R730 among other 13th and 14th generation servers.

Does the SAS backplane limit the drive speed to 6 Gb/s when a SATA SSD is used?

The tray provides a SAS hardware interface; a SATA drive will run at its native SATA speed, which is typically 6 Gb/s for modern SSDs.

What mounting holes does the caddy use to secure the 2.5" drive?

Four mount screws are included and the tray body is metal with ABS corbels, matching the standard 2.5" drive hole pattern.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.