Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green PCB adapter card with M.2 slot and SATA connectors

Vszerda

Vszerda M.2 B/B+M Key SATA Adapter 2230-2280

SKU CH-3V8S-SQDNB

Converts SATA-bus M.2 SSDs (2230-2280, B/B+M key) to a standard SATA 6Gbps connection

  • Converts M.2 SATA SSDs to 6.0 Gbps SATA
  • Works with B-key and B+M-key modules only
  • Fits 2230 2242 2260 2280 form factors
  • Backward compatible with 1.5 and 3.0 Gbps SATA
  • Excludes PCIe NVME M-key and M+B-key drives

SATA-Bus M.2 Adapter for 2230-2280 SSDs

This adapter converts a SATA-bus M.2 NGFF SSD into a standard SATA 6Gbps connection. It accepts B-key and B+M-key modules in 2230, 2242, 2260 and 2280 lengths. The card is designed for builders who want to use an M.2 SATA drive in a system that only offers a 2.5-inch SATA bay.

Fits a SATA Port and Frees the M.2 Slot

The board plugs into a motherboard or controller SATA port and draws power through the same cable, so no extra power connector is required. It lets you repurpose an existing M.2 SATA SSD without occupying the primary M.2 socket, leaving that slot open for a future NVME drive or other expansion card.

Sustained Throughput at SATA III Speeds

Under continuous workloads the adapter maintains the full SATA III 6.0 Gbps link and is backward compatible with 1.5 and 3.0 Gbps revisions. It does not support PCIe-based M-key or M+B-key NVME AHCI SSDs such as the Samsung 950PRO or 960EVO, so buyers needing NVME performance must choose a different solution.

Přednosti

  • Converts M.2 SATA SSDs to 6.0 Gbps SATA
  • Works with B-key and B+M-key modules only
  • Fits 2230 2242 2260 2280 form factors
  • Backward compatible with 1.5 and 3.0 Gbps SATA
  • Excludes PCIe NVME M-key and M+B-key drives

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

What is the maximum data rate this adapter can sustain when running a SATA III SSD all day?

The adapter supports SATA revision III at 6.0 Gbps, so sustained throughput is limited by that interface.

Does the adapter add noticeable heat or power draw when used continuously in a desktop?

It is a passive PCB with no active cooling; power draw is minimal and heat output is negligible during continuous operation.

Which SSD keying and form factors must I already own for this adapter to work?

You need a SATA-bus M.2 SSD with B key or B+M key in 2230, 2242, 2260 or 2280 length; M-key NVMe drives are not supported.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.