Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch SATA hard drive with circuit board visible

Western Digital

Western Digital WD1002FBYS 1TB 7200RPM 32MB 3.5" SATA 0-HOURS internal hard drive

SKU CH-M5TM-X1KJD

1 TB desktop hard drive spins at 7200 RPM with a 32 MB cache over a 3.5" SATA interface

  • 1TB capacity for desktop storage with 7200RPM speed
  • 32MB cache buffer improves data throughput on SATA 3Gb/s interface
  • Zero-hour condition means the drive has never been powered on
  • 5-inch form factor fits standard desktop drive bays
  • 0-pound weight suits fixed workstation installations

RE3 Enterprise 1TB SATA Drive

This Western Digital RE3 WD1002FBYS is a new 1TB desktop internal hard drive built for continuous operation. It spins at 7200RPM with a 32MB cache and connects through a 3.5" SATA 3Gb/s interface. The unit reports zero power-on hours.

Suited For RAID And NAS Builds

This drive suits system builders assembling RAID arrays or NAS appliances that benefit from enterprise-class firmware and vibration tolerance. It is not for buyers who need the faster throughput of a 6Gb/s SATA link or the lower latency of solid-state storage.

3Gb/s SATA Interface Limits Speed

The single specification that decides fit is the 3Gb/s SATA interface, which caps maximum transfer rates below what modern 6Gb/s controllers and SSDs deliver. Verify that your host controller or backplane supports this generation before purchasing.

Přednosti

  • 1TB capacity for desktop storage with 7200RPM speed
  • 32MB cache buffer improves data throughput on SATA 3Gb/s interface
  • Zero-hour condition means the drive has never been powered on
  • 5-inch form factor fits standard desktop drive bays
  • 0-pound weight suits fixed workstation installations

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How much power and heat does the WD1002FBYS produce when running continuously?

The 7200RPM spindle and 32MB cache draw typical desktop 3.5" SATA power levels; expect normal mechanical-drive warmth during all-day operation.

What connector and controller does the WD1002FBYS need to work?

It requires a standard 3.5" SATA 3Gb/s port and matching data plus power cables from the host system.

Will the WD1002FBYS work alongside older SATA 1.5Gb/s drives on the same controller?

Yes, the SATA 3Gb/s interface negotiates down to 1.5Gb/s automatically, so it shares a controller with legacy drives without extra setup.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.