暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

Western Digital

Western Digital WD1002FBYS 1TB 7200RPM 32MB 3.5" SATA 0-HOURS internal hard drive

SKU CH-M5TM-X1KJD

1 TB desktop hard drive spins at 7200 RPM with a 32 MB cache over a 3.5" SATA interface

  • 1TB capacity for desktop storage with 7200RPM speed
  • 32MB cache buffer improves data throughput on SATA 3Gb/s interface
  • Zero-hour condition means the drive has never been powered on
  • 5-inch form factor fits standard desktop drive bays
  • 0-pound weight suits fixed workstation installations

RE3 Enterprise 1TB SATA Drive

This Western Digital RE3 WD1002FBYS is a new 1TB desktop internal hard drive built for continuous operation. It spins at 7200RPM with a 32MB cache and connects through a 3.5" SATA 3Gb/s interface. The unit reports zero power-on hours.

Suited For RAID And NAS Builds

This drive suits system builders assembling RAID arrays or NAS appliances that benefit from enterprise-class firmware and vibration tolerance. It is not for buyers who need the faster throughput of a 6Gb/s SATA link or the lower latency of solid-state storage.

3Gb/s SATA Interface Limits Speed

The single specification that decides fit is the 3Gb/s SATA interface, which caps maximum transfer rates below what modern 6Gb/s controllers and SSDs deliver. Verify that your host controller or backplane supports this generation before purchasing.

特長

  • 1TB capacity for desktop storage with 7200RPM speed
  • 32MB cache buffer improves data throughput on SATA 3Gb/s interface
  • Zero-hour condition means the drive has never been powered on
  • 5-inch form factor fits standard desktop drive bays
  • 0-pound weight suits fixed workstation installations

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power and heat does the WD1002FBYS produce when running continuously?

The 7200RPM spindle and 32MB cache draw typical desktop 3.5" SATA power levels; expect normal mechanical-drive warmth during all-day operation.

What connector and controller does the WD1002FBYS need to work?

It requires a standard 3.5" SATA 3Gb/s port and matching data plus power cables from the host system.

Will the WD1002FBYS work alongside older SATA 1.5Gb/s drives on the same controller?

Yes, the SATA 3Gb/s interface negotiates down to 1.5Gb/s automatically, so it shares a controller with legacy drives without extra setup.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。