Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular silver server PSU with rear fan grille and power connector

WMtec

WMtec D2000E-S0 2000W Platinum server power supply

SKU CH-E3AM-8KVYY

2000W Platinum server power supply delivering 12.2V at up to 163.93A for compatible PowerEdge servers

  • 2000 W output at 200-240 V input
  • 1000 W output at 100-120 V input
  • 80 Plus Platinum efficiency rating
  • 2 V main rail with 163.93 A capacity
  • Compatible with PowerEdge R740, R840, R940, C4130, FX2S

2000W Platinum server power supply

The WMtec D2000E-S0 is a 2000 watt Platinum-rated server power supply designed for Dell PowerEdge R740, R840, R940, C4130 and FX2S systems. It delivers up to 2000W on 200-240V input and 1000W on 100-120V input. This unit suits administrators replacing a failed or degraded OEM module in compatible rackmount servers.

Replaces OEM DPS-2000EB A modules

This supply matches the DPS-2000EB A part used in the listed PowerEdge chassis, providing a direct swap for units showing efficiency loss or audible fan wear. The jump is worth it when the existing module can no longer sustain 12.2V output at 163.93A under full load or when 80 Plus Platinum efficiency is required to meet datacentre power budgets. It is not for builders needing ATX pinouts, consumer GPU cables or redundant hot-swap trays not present in the target servers.

Verify chassis slot and input voltage

Confirm the server model appears in the compatibility list and that the chassis accepts the D2000E-S0 form factor before ordering. Check that the facility provides 200-240V circuits to reach the 2000W rating; at 100-120V the unit is limited to 1000W maximum output power. Ensure the 12.2V rail at 81.97A or 163.93A and the 12Vsb rail at 3.5A meet the system's load requirements.

Přednosti

  • 2000 W output at 200-240 V input
  • 1000 W output at 100-120 V input
  • 80 Plus Platinum efficiency rating
  • 2 V main rail with 163.93 A capacity
  • Compatible with PowerEdge R740, R840, R940, C4130, FX2S

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

What server chassis dimensions and mounting points does the D2000E-S0 require?

The D2000E-S0 fits Dell PowerEdge R740, R840, R940, C4130 and FX2S chassis using the standard redundant PSU form factor and hot-plug latch.

What is the correct sequence to hot-swap this PSU and which step is often missed?

Unlock the release lever, slide the old unit out, insert the D2000E-S0 until the latch clicks, then verify the green AC and DC LEDs are both lit.

When should the internal fan or the whole D2000E-S0 be replaced?

Replace the unit if fan noise increases, airflow drops, or either 12.2 V rail (81.97 A at low line or 163.93 A at high line) falls out of regulation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.