我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular silver server PSU with rear fan grille and power connector

WMtec

WMtec D2000E-S0 2000W Platinum server power supply

SKU CH-E3AM-8KVYY

2000W Platinum server power supply delivering 12.2V at up to 163.93A for compatible PowerEdge servers

  • 2000 W output at 200-240 V input
  • 1000 W output at 100-120 V input
  • 80 Plus Platinum efficiency rating
  • 2 V main rail with 163.93 A capacity
  • Compatible with PowerEdge R740, R840, R940, C4130, FX2S

2000W Platinum server power supply

The WMtec D2000E-S0 is a 2000 watt Platinum-rated server power supply designed for Dell PowerEdge R740, R840, R940, C4130 and FX2S systems. It delivers up to 2000W on 200-240V input and 1000W on 100-120V input. This unit suits administrators replacing a failed or degraded OEM module in compatible rackmount servers.

Replaces OEM DPS-2000EB A modules

This supply matches the DPS-2000EB A part used in the listed PowerEdge chassis, providing a direct swap for units showing efficiency loss or audible fan wear. The jump is worth it when the existing module can no longer sustain 12.2V output at 163.93A under full load or when 80 Plus Platinum efficiency is required to meet datacentre power budgets. It is not for builders needing ATX pinouts, consumer GPU cables or redundant hot-swap trays not present in the target servers.

Verify chassis slot and input voltage

Confirm the server model appears in the compatibility list and that the chassis accepts the D2000E-S0 form factor before ordering. Check that the facility provides 200-240V circuits to reach the 2000W rating; at 100-120V the unit is limited to 1000W maximum output power. Ensure the 12.2V rail at 81.97A or 163.93A and the 12Vsb rail at 3.5A meet the system's load requirements.

商品特色

  • 2000 W output at 200-240 V input
  • 1000 W output at 100-120 V input
  • 80 Plus Platinum efficiency rating
  • 2 V main rail with 163.93 A capacity
  • Compatible with PowerEdge R740, R840, R940, C4130, FX2S

商品規格

本商品目前尚未公佈規格。

商品問答

What server chassis dimensions and mounting points does the D2000E-S0 require?

The D2000E-S0 fits Dell PowerEdge R740, R840, R940, C4130 and FX2S chassis using the standard redundant PSU form factor and hot-plug latch.

What is the correct sequence to hot-swap this PSU and which step is often missed?

Unlock the release lever, slide the old unit out, insert the D2000E-S0 until the latch clicks, then verify the green AC and DC LEDs are both lit.

When should the internal fan or the whole D2000E-S0 be replaced?

Replace the unit if fan noise increases, airflow drops, or either 12.2 V rail (81.97 A at low line or 163.93 A at high line) falls out of regulation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。