Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black rectangular ATX power supply unit with a single 135 mm fan and modular cable sockets

XPG

XPG COREREACTORII1000G-BKCUS 1000W power supply

SKU CH-RMQ7-QJP8S MPN COREREACTORII1000G-BKCUS

A 1000 W ATX 3.0 power supply with full modular cables, dual 80 PLUS and Cybenetics GOLD certification, Japanese 105 °C capacitors and a 135 mm fan

  • TypeIntel ATX 12V v3.0
  • Maximum Power1000 W
  • Fans1 x 135 mm
  • PFC0.99
  • Main Connector20+4Pin
  • +12V RailsSingle
  • 1000 W single-rail output powers demanding GPUs and CPUs
  • Dual 80 PLUS and Cybenetics Gold certifications confirm high efficiency
  • Intel ATX 3.0 and PCIe 5.0 compliance with native 12VHPWR connector
  • Full modular design with 135 mm fan keeps cables tidy and airflow steady
  • 100 % Japanese 105 °C capacitors and 100,000 h MTBF ensure long-term reliability

XPG Corereactor II 1000W ATX 3.0

This fully modular power supply delivers 1000 W and complies with Intel ATX 12V v3.0 and PCIe 5.0 specifications. It includes a native 12VHPWR 12+4 pin connector plus additional PCIe 6+2 pin cables for modern graphics cards. The unit is built with 100% Japanese 105°C capacitors and a single +12V rail.

Sustained load behaviour at 1000 W

Gold certification from both 80 PLUS and Cybenetics confirms high efficiency across typical load ranges. Active PFC rated at 0.99 and a 135 mm fan maintain stable output during extended operation. Mean time between failures is rated at 100,000 hours at 25°C. Eight industrial protections guard against voltage and current anomalies.

ATX 3.0 and PCIe 5.0 interface limits

The 12VHPWR connector supports the power-excursion requirements defined by the ATX 3.0 design guide. Total +12V output reaches the full 1000 W capacity on a single rail. Cable length and routing must accommodate the 160 mm chassis depth. Input voltage spans 100 to 240 V at 50/60 Hz for worldwide use.

Přednosti

  • 1000 W single-rail output powers demanding GPUs and CPUs
  • Dual 80 PLUS and Cybenetics Gold certifications confirm high efficiency
  • Intel ATX 3.0 and PCIe 5.0 compliance with native 12VHPWR connector
  • Full modular design with 135 mm fan keeps cables tidy and airflow steady
  • 100 % Japanese 105 °C capacitors and 100,000 h MTBF ensure long-term reliability

Specifikace

BrandXPG
SeriesCorereactor
ModelCOREREACTORII1000G-BKCUS
TypeIntel ATX 12V v3.0
Maximum Power1000 W
Fans1 x 135 mm
PFC0.99
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector1 x 12VHPWR 12+4Pin, 2 x 12VHPWR 12+4Pin to x2 6+2Pin, 6 PCI-E 6+2 to 6+2Pin
SATA Power Connector9
Max PSU Length160 mm
ModularFull Modular
Energy-Efficient80 PLUS GOLD Certified
Over Voltage ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current13A
Output+3.3V@22A,+5V@22A, [email protected] , [email protected] , +5VSB@3A
MTBF100,000 hours @ 25°C
ApprovalsCE | CB| FCC(IC) | TUV | cTUVus | TUV S-Mark | NOM | BSMI | UKCA |EAC | CCC | RCM
FeaturesCORE REACTOR II series power supply units meet Intel ATX 3.0 design guide specifications, and feature a 12VHPWR connector. By upgrading to an ATX 3.0 compliant power supply, you'll be fully equipped for the upcoming wave of new high-performance components. A must for the modern gamer, creator, or AI developer. Stay ahead of the curve by upgrading to an ATX 3.0 PSU, the new standard in PC hardware.
Dimensions160 x 150 x 86mm
Weight1.77kg
Package Content1 x XPG CorereactorII 1000W GOLD POWER SUPPLY UNIT, 1x AC Power Cord, 1x User Manual, 4x PSU Screws
Přepravní hmotnost3.81 kg
Rozměry balení339 × 213 × 159 mm

Otázky k tomuto produktu

How loud and hot does the 135 mm fan get when the unit runs at full load all day?

The 135 mm fan is the only moving part; at full load it moves enough air to keep internal temperatures within the 105 °C capacitor rating while meeting both 80 PLUS Gold and Cybenetics Gold efficiency targets, so waste heat and noise stay low.

Which cables must I already have to connect this supply to my motherboard and drives?

You need a motherboard with a 20+4 pin ATX socket and a CPU 12V connector; all PCIe, SATA and peripheral cables are included in the full-modular set, so no extra cables are required.

Will the single 12V rail and 12VHPWR connector work safely with my older graphics card that uses 6+2 pin plugs?

Yes, the package includes two 12VHPWR-to-dual-6+2 adapters plus six native 6+2-to-6+2 cables, so legacy cards draw from the same single 12V rail without adapters you must buy separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.