Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black 50x17mm case fan with three-pin connector

Zyvpee

Zyvpee 2206ML-09W-S19 50x17mm 3-pin case fan

SKU CH-0S25-1MFCQ

A 50×17 mm ball-bearing case fan running below 1600 RPM with a 3-pin DC7 V connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact cooling for tight builds
  • 50 mm x 17 mm frame fits slim enclosures
  • Ball bearing runs below 1600 RPM for quiet operation
  • 3-pin DC 7 V connector draws only 0.05 A
  • Non-LED black design keeps focus on performance

Compact 50 mm cooling fan

The Zyvpee 2206ML-09W-S19 is a 50 by 17 millimetre case fan designed for tight spaces such as small-form-factor PCs, projectors or printers. It runs on 7 V DC at 0.05 A and uses a three-pin connector for basic speed reporting. The ball bearing and non-LED black frame keep the unit simple and durable.

Maximum speed under 1600 RPM

The fan spins at less than 1600 RPM, which determines how much airflow it can deliver in a 50 mm frame. This single figure tells you whether the cooler can meet the thermal load of your specific device. Check the RPM against your equipment's requirements before fitting.

Suits builders needing a tiny 3-pin replacement

It fits projects that demand a 50 mm square footprint and a three-wire power lead. Buyers who need higher static pressure, PWM control or a larger frame should look elsewhere.

Přednosti

  • Compact cooling for tight builds
  • 50 mm x 17 mm frame fits slim enclosures
  • Ball bearing runs below 1600 RPM for quiet operation
  • 3-pin DC 7 V connector draws only 0.05 A
  • Non-LED black design keeps focus on performance

Specifikace

BrandZyvpee
Series2206ML-09W-S19
Model2206ML-09W-S19
TypeCPU Cooler Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions50*17MM

Otázky k tomuto produktu

What does the sub-1600 RPM rating mean for noise and airflow in a compact build?

The fan spins below 1600 RPM, keeping acoustic output low while still moving enough air for small-form-factor CPU coolers or projector enclosures.

What does the 3-pin connector limit compared with a 4-pin PWM header?

A 3-pin connection allows voltage-based speed control only; the motherboard cannot send PWM duty-cycle signals, so minimum speed is set by the lowest stable voltage.

Will the 50 by 17 mm frame fit standard 50 mm mounting holes?

Yes — the 50 mm square frame matches common 50 mm hole spacing, and the 17 mm thickness clears most low-profile heatsinks and projector chassis.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.