Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black square 92mm case fan 25mm thick three wire connector

Zyvpee

Zyvpee 3610KL-05W-B49 92x25mm 24V 0.16A 3-pin case fan

SKU CH-4Q1J-M72BJ

A 92 mm square DC case fan with ball bearing, 24 V 0.16 A draw and a 3-pin connector for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling
  • 24 V DC supply fits industrial inverter systems
  • 92 mm square frame matches standard 9225 mounting holes
  • 3-pin connector provides tachometer feedback for speed monitoring
  • Ball bearing construction extends operational lifespan
  • 16 A draw keeps power consumption low

92 mm square DC cooler for inverter cooling

The Zyvpee 3610KL-05W-B49 is a 92 by 25 mm case fan designed for inverter cooling duties. It runs on 24 V DC and draws 0.16 A through a three-pin power connector. The black frame carries no LED lighting. Builders fitting industrial or embedded enclosures will find the square footprint and voltage match typical inverter housings.

Three-pin connector limits speed reporting to RPM

A three-pin header supplies power and a tachometer signal but cannot accept a PWM control line. The fan therefore runs at a fixed voltage or varies speed only through voltage adjustment from the motherboard or controller. Systems that require closed-loop PWM curves or software-defined quiet modes will not gain that granularity with this connector.

Ball bearing and 3610KL model code indicate

The ball bearing construction targets continuous operation in inverter converter cooler roles. The 3610KL-05W-B49 designation and NMB 9225 reference align with OEM replacement sourcing. Mounting holes follow the standard 92 mm square pattern so the unit drops into existing cut-outs without modification.

Přednosti

  • 24 V DC supply fits industrial inverter systems
  • 92 mm square frame matches standard 9225 mounting holes
  • 3-pin connector provides tachometer feedback for speed monitoring
  • Ball bearing construction extends operational lifespan
  • 16 A draw keeps power consumption low

Specifikace

BrandZyvpee
Series3610KL-05W-B49 F14
Model3610KL-05W-B49
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions92*25MM

Otázky k tomuto produktu

Should I choose the 92 mm or 9225 version of this fan?

The model code 3610KL-05W-B49 identifies a single 92 mm square frame with a 25 mm thickness; there is no separate capacity or version to select.

What does the 24 V 0.16 A rating mean once the fan is installed in my system?

It draws 0.16 amps from a 24 volt DC supply, so the connected header or inverter must provide 24 V and at least that current.

How does the 3-pin connector limit speed control in practice?

The three wires carry power, ground and a tachometer signal; voltage regulation is the only way to vary speed because no PWM wire is present.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.