Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 50 by 15 mm square frame PWM case fan with four pins

Zyvpee

Zyvpee DA05015R12H 50x15mm 12V PWM case fan

SKU CH-180V-KR2VW

A 50 mm by 15 mm hydraulic-bearing case fan with 4-pin PWM control for CPU coolers

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeHydraulic
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 50 × 15 mm footprint fits tight CPU coolers
  • Hydraulic bearing reduces friction for quieter long-term operation
  • 4-pin PWM connector enables precise motherboard speed control
  • 12 V 0.2 A rating keeps power draw low in small builds
  • Non-LED black frame blends into any chassis aesthetic

50 mm PWM fan for compact CPU coolers

The Zyvpee DA05015R12H is a 50 by 15 millimetre axial fan designed for tight CPU cooler mounts. It runs on 12 volts and draws 0.2 amps through a standard four-pin PWM connector. The hydraulic bearing and non-LED black frame suit builders who need a small, controllable airflow source without lighting.

Hydraulic bearing maintains steady speed under load

Under sustained load the hydraulic bearing keeps rotation smooth while the PWM signal adjusts rpm to match thermal demand. Four-wire control lets the motherboard ramp speed gradually instead of switching abruptly between fixed voltages. This behaviour reduces acoustic spikes during long rendering or compile sessions.

Four-pin PWM limits minimum speed to motherboard

The 4-pin interface allows variable control down to the lowest duty cycle the board firmware permits. If a header cannot output a low enough PWM frequency the fan may not spin below a certain threshold. Builders who need near-silent idle should verify their header’s minimum duty cycle before relying on ultra-low rpm operation.

Přednosti

  • Compact 50 × 15 mm footprint fits tight CPU coolers
  • Hydraulic bearing reduces friction for quieter long-term operation
  • 4-pin PWM connector enables precise motherboard speed control
  • 12 V 0.2 A rating keeps power draw low in small builds
  • Non-LED black frame blends into any chassis aesthetic

Specifikace

BrandZyvpee
SeriesDA05015R12H
ModelDA05015R12H
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeHydraulic
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions50 * 15 mm

Otázky k tomuto produktu

How much noise and heat does the 50x15mm 12V PWM fan produce when running continuously?

The Zyvpee DA05015R12H uses a hydraulic bearing for quieter operation and draws 0.2 A at 12 V, keeping heat output low during all-day use.

What existing connector must my motherboard or controller provide for this 4-pin PWM fan?

A standard 4-pin PWM header is required; the fan’s 4-wire plug connects directly to it for speed control.

Will the 50 mm frame fit the mounting holes on my older CPU cooler?

The fan measures 50 x 15 mm, matching common 50 mm cooler mounts; verify your cooler’s hole spacing before installing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.