Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black square 12V case fan 50mm 15mm thick 2-pin ball bearing

Zyvpee

Zyvpee MGA5012HR-O15 50x15mm 12V .14A 2-pin case fan

SKU CH-1M2E-ACC3Y

A compact 50 by 15 millimetre case fan with ball bearing, 12 volt 0.14 amp two-pin power and 2000 to 2499 RPM airflow

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2000-2499 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 50×15 mm footprint fits tight case spaces
  • Ball-bearing motor runs at 2000-2499 RPM for steady airflow
  • 12 V, .14 A draw keeps power use low
  • Simple 2-pin DC connector plugs straight into motherboard
  • Non-LED black frame blends into any build

Zyvpee MGA5012HR-O15 50x15mm 12V fan

This Zyvpee MGA5012HR-O15 is a 50 mm square case fan with a 15 mm thickness. It runs on 12 V DC at 0.14 A and connects through a 2-pin power header. The black frame carries no LED lighting.

Suits compact builds with 50 mm mounts

It fits chassis or heatsinks drilled for a 50 mm frame and a 15 mm depth. The ball-bearing motor spins between 2000 and 2499 RPM. Builders needing a larger frame, a 3-pin or 4-pin header, or addressable lighting should look elsewhere.

50 mm mounting footprint decides fit

The 50 mm by 50 mm screw pattern is the single dimension that determines whether this fan can be installed. If the case or cooler uses a different hole spacing the fan will not mount.

Přednosti

  • Compact 50×15 mm footprint fits tight case spaces
  • Ball-bearing motor runs at 2000-2499 RPM for steady airflow
  • 12 V, .14 A draw keeps power use low
  • Simple 2-pin DC connector plugs straight into motherboard
  • Non-LED black frame blends into any build

Specifikace

SeriesMGA5012HR-O15
ModelMGA5012HR-O15
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2000-2499 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions50*50*15mm

Otázky k tomuto produktu

What speed range does the 2-pin 12 V connection actually allow the fan to reach?

The 2-pin connector supplies fixed 12 V power, so the motor runs at its rated 2000 to 2499 RPM without PWM speed control.

What clearance does the 50 mm square frame with 15 mm thickness require?

The fan measures 50 mm by 50 mm and is 15 mm thick, so the mounting spot must provide at least 15 mm depth and a 50 mm square cut-out.

How do you connect the two-pin lead, and what mistake should be avoided?

Plug the 2-pin header onto the motherboard or fan-controller 2-pin socket, matching the keyed orientation; the common error is forcing it on backwards, which leaves the fan unpowered.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.