Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small transparent square case fan with two-pin power connector

Zyvpee

Zyvpee T124010SL 12V 0.1A 2-pin VGA case fan

SKU CH-FFN7-WXS28

A compact 12 V sleeve-bearing fan spins under 1600 RPM for low-profile graphics-card cooling

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve
  • RPM<1600 RPM
  • Power Connector2 Pin
  • LEDNon-LED
  • Compact 37 mm diameter fits tight VGA cooler spaces
  • 12 V 0.1 A draw keeps power use minimal
  • Two-pin connector enables simple motherboard or adapter hookup
  • Sleeve bearing runs below 1600 RPM for quiet operation
  • Transparent frame suits custom-look graphics card builds

Compact VGA Cooler Fan

This Zyvpee T124010SL is a 12 V, 0.1 A case fan with a two-pin power connector. It uses a sleeve bearing and spins below 1600 RPM without LED lighting. The unit is designed to mount on compatible graphics card coolers. Its small 37 mm diameter suits tight spaces around GPU heatsinks.

GPU Repair and Tight-Clearance Builds

The fan suits owners replacing a failed cooler on the specific cards listed in the manufacturer highlights. It does not suit builders who need a standard case-mount fan, a PWM-controlled header, or a higher airflow rating for a CPU tower cooler. The two-pin connector provides fixed voltage operation only.

37 mm Diameter Decides Fit

Physical fit is determined by the 37 mm diameter and the 23 by 23 by 29 mm frame. Verify these dimensions against the original cooler before ordering. The two-pin connector and sub-1600 RPM speed are fixed characteristics that cannot be adapted to other headers or control schemes.

Přednosti

  • Compact 37 mm diameter fits tight VGA cooler spaces
  • 12 V 0.1 A draw keeps power use minimal
  • Two-pin connector enables simple motherboard or adapter hookup
  • Sleeve bearing runs below 1600 RPM for quiet operation
  • Transparent frame suits custom-look graphics card builds

Specifikace

BrandZyvpee
SeriesT124010SL
ModelT124010SL
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeSleeve
RPM<1600 RPM
Power Connector2 Pin
LEDNon-LED
Featuresvga fan
DimensionsDiam : 37mm
Package Contentsrefer to title

Otázky k tomuto produktu

Does this fan need a 12 V 2-pin header on the graphics card or cooler?

Yes, it runs on 12 V and uses a 2-pin connector, so the card or cooler must provide a matching 2-pin header.

Will the 23 mm by 29 mm frame fit the mounting holes on a G1975X or X1300 cooler?

The fan body measures 23 mm by 29 mm, matching the mounting pattern used on those cooler models.

How can I confirm the fan is spinning correctly after installation?

The sleeve-bearing fan should rotate smoothly up to 1600 RPM; listen for steady airflow and check GPU temperatures under load.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.