Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

ASRock

ASRock H470M-HDV/M.2 DDR4 2933 MHz Intel motherboard

SKU CH-VFHN-XRX8D

Micro-ATX board for 10th-gen Intel CPUs with DDR4 2933 support, 7-phase power, PCIe 3.0 x16, M.2 Key E, HDMI/DVI-D/D-Sub video, 7.1 audio and four SATA3 ports

  • CPU TypeIntel Core 10th Gen (LGA 1200)
  • Supports 10th Gen Intel Core processors on LGA 1200 socket
  • 7-phase power design with 50A inductors for stable delivery
  • Dual-channel DDR4 memory up to 2933 MHz with XMP 2.0
  • Super M.2 slot handles PCIe Gen3 x4 and SATA3 drives
  • 1-channel audio via Realtek ALC887 plus 8 USB 3.2 Gen1 ports

Ready for 10th Gen Intel Core

The board uses the LGA 1200 socket and the Intel H470 chipset to host 10th generation Intel Core processors. A 7-phase digital power design and 50A high-efficiency inductors keep voltage stable for daily workloads. Dual-channel DDR4 memory tops out at 2933 MHz with Core i9 or i7 chips, while i5, i3, Pentium and Celeron stop at 2666 MHz. Maximum capacity is 64 GB across two slots.

Steady output with Super Alloy build

Gemstone-black PCB and moisture-resistant fiber glass reduce leakage currents during long sessions. The 7-phase VRM and 50A inductors dissipate heat evenly so clocks hold under sustained multi-core loads. Realtek ALC887 drives 7.1 channel audio without extra cards. Super M.2 runs at PCIe Gen3 x4 or SATA3 speeds for fast storage that does not throttle. Full Protection covers every USB, audio and network port against surges.

Check CPU tier and slot budget

Memory speed depends on which 10th Gen processor you install — i9/i7 reach 2933 MHz, i5/i3/Pentium/Celeron reach 2666 MHz. Only two DDR4 slots exist, so 64 GB requires 32 GB modules. A single PCIe 3.0 x16 slot and two x1 slots limit add-in cards. One M.2 Key E is reserved for Wi-Fi, while the Super M.2 shares bandwidth with SATA3. Four SATA3 ports and eight USB 3.2 Gen1 ports handle drives and peripherals.

Fordele

  • Supports 10th Gen Intel Core processors on LGA 1200 socket
  • 7-phase power design with 50A inductors for stable delivery
  • Dual-channel DDR4 memory up to 2933 MHz with XMP 2.0
  • Super M.2 slot handles PCIe Gen3 x4 and SATA3 drives
  • 1-channel audio via Realtek ALC887 plus 8 USB 3.2 Gen1 ports

Specifikationer

CPU TypeIntel Core 10th Gen (LGA 1200)

Spørgsmål om denne vare

How much power does the 7-phase design draw under continuous load?

The board uses a 7-phase digital power design with 50A inductors to deliver stable voltage to 10th Gen Intel Core processors in the LGA 1200 socket.

Which components must I already have to complete a working system?

You need a 10th Generation Intel Core processor for the LGA 1200 socket, at least one DDR4 memory module up to 2933 MHz, a graphics card or CPU with integrated graphics for the HDMI, DVI-D or D-Sub ports, and storage for the M.2 or SATA3 connectors.

Can I keep my existing DDR4 memory when moving to this H470 board?

Yes, the two DDR4 slots accept modules at 2133, 2400, 2666, 2800 or 2933 MHz up to 64 GB total, and XMP 2.0 profiles are supported; Core i5 or i3 CPUs limit the maximum speed to 2666 MHz.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.