NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
ASRock
Micro-ATX board for 10th-gen Intel CPUs with DDR4 2933 support, 7-phase power, PCIe 3.0 x16, M.2 Key E, HDMI/DVI-D/D-Sub video, 7.1 audio and four SATA3 ports
The board uses the LGA 1200 socket and the Intel H470 chipset to host 10th generation Intel Core processors. A 7-phase digital power design and 50A high-efficiency inductors keep voltage stable for daily workloads. Dual-channel DDR4 memory tops out at 2933 MHz with Core i9 or i7 chips, while i5, i3, Pentium and Celeron stop at 2666 MHz. Maximum capacity is 64 GB across two slots.
Gemstone-black PCB and moisture-resistant fiber glass reduce leakage currents during long sessions. The 7-phase VRM and 50A inductors dissipate heat evenly so clocks hold under sustained multi-core loads. Realtek ALC887 drives 7.1 channel audio without extra cards. Super M.2 runs at PCIe Gen3 x4 or SATA3 speeds for fast storage that does not throttle. Full Protection covers every USB, audio and network port against surges.
Memory speed depends on which 10th Gen processor you install — i9/i7 reach 2933 MHz, i5/i3/Pentium/Celeron reach 2666 MHz. Only two DDR4 slots exist, so 64 GB requires 32 GB modules. A single PCIe 3.0 x16 slot and two x1 slots limit add-in cards. One M.2 Key E is reserved for Wi-Fi, while the Super M.2 shares bandwidth with SATA3. Four SATA3 ports and eight USB 3.2 Gen1 ports handle drives and peripherals.
| CPU Type | Intel Core 10th Gen (LGA 1200) |
|---|
The board uses a 7-phase digital power design with 50A inductors to deliver stable voltage to 10th Gen Intel Core processors in the LGA 1200 socket.
You need a 10th Generation Intel Core processor for the LGA 1200 socket, at least one DDR4 memory module up to 2933 MHz, a graphics card or CPU with integrated graphics for the HDMI, DVI-D or D-Sub ports, and storage for the M.2 or SATA3 connectors.
Yes, the two DDR4 slots accept modules at 2133, 2400, 2666, 2800 or 2933 MHz up to 64 GB total, and XMP 2.0 profiles are supported; Core i5 or i3 CPUs limit the maximum speed to 2666 MHz.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?