We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ASRock H470M-HDV/M.2 micro-ATX motherboard, black PCB, LGA 1200 socket, two DDR4 slots, HDMI, DVI, VGA ports, PCIe x16 and M.2 slots

ASRock

ASRock H470M-HDV/M.2 DDR4 2933 MHz Intel motherboard

SKU CH-VFHN-XRX8D

Micro-ATX board for 10th-gen Intel CPUs with DDR4 2933 support, 7-phase power, PCIe 3.0 x16, M.2 Key E, HDMI/DVI-D/D-Sub video, 7.1 audio and four SATA3 ports

  • CPU TypeIntel Core 10th Gen (LGA 1200)
  • Supports 10th Gen Intel Core processors on LGA 1200 socket
  • 7-phase power design with 50A inductors for stable delivery
  • Dual-channel DDR4 memory up to 2933 MHz with XMP 2.0
  • Super M.2 slot handles PCIe Gen3 x4 and SATA3 drives
  • 1-channel audio via Realtek ALC887 plus 8 USB 3.2 Gen1 ports

Ready for 10th Gen Intel Core

The board uses the LGA 1200 socket and the Intel H470 chipset to host 10th generation Intel Core processors. A 7-phase digital power design and 50A high-efficiency inductors keep voltage stable for daily workloads. Dual-channel DDR4 memory tops out at 2933 MHz with Core i9 or i7 chips, while i5, i3, Pentium and Celeron stop at 2666 MHz. Maximum capacity is 64 GB across two slots.

Steady output with Super Alloy build

Gemstone-black PCB and moisture-resistant fiber glass reduce leakage currents during long sessions. The 7-phase VRM and 50A inductors dissipate heat evenly so clocks hold under sustained multi-core loads. Realtek ALC887 drives 7.1 channel audio without extra cards. Super M.2 runs at PCIe Gen3 x4 or SATA3 speeds for fast storage that does not throttle. Full Protection covers every USB, audio and network port against surges.

Check CPU tier and slot budget

Memory speed depends on which 10th Gen processor you install — i9/i7 reach 2933 MHz, i5/i3/Pentium/Celeron reach 2666 MHz. Only two DDR4 slots exist, so 64 GB requires 32 GB modules. A single PCIe 3.0 x16 slot and two x1 slots limit add-in cards. One M.2 Key E is reserved for Wi-Fi, while the Super M.2 shares bandwidth with SATA3. Four SATA3 ports and eight USB 3.2 Gen1 ports handle drives and peripherals.

Highlights

  • Supports 10th Gen Intel Core processors on LGA 1200 socket
  • 7-phase power design with 50A inductors for stable delivery
  • Dual-channel DDR4 memory up to 2933 MHz with XMP 2.0
  • Super M.2 slot handles PCIe Gen3 x4 and SATA3 drives
  • 1-channel audio via Realtek ALC887 plus 8 USB 3.2 Gen1 ports

Specifications

CPU TypeIntel Core 10th Gen (LGA 1200)

Questions about this item

How much power does the 7-phase design draw under continuous load?

The board uses a 7-phase digital power design with 50A inductors to deliver stable voltage to 10th Gen Intel Core processors in the LGA 1200 socket.

Which components must I already have to complete a working system?

You need a 10th Generation Intel Core processor for the LGA 1200 socket, at least one DDR4 memory module up to 2933 MHz, a graphics card or CPU with integrated graphics for the HDMI, DVI-D or D-Sub ports, and storage for the M.2 or SATA3 connectors.

Can I keep my existing DDR4 memory when moving to this H470 board?

Yes, the two DDR4 slots accept modules at 2133, 2400, 2666, 2800 or 2933 MHz up to 64 GB total, and XMP 2.0 profiles are supported; Core i5 or i3 CPUs limit the maximum speed to 2666 MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.