Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Silver 3.5 inch SAS hard drive bare unit with circuit board visible

DELL

DELL 400-AKMJ 6TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-HGCS-1BT5Y

A 6 TB 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Dell 400-AKMJ 6 TB SAS Drive

The Dell 400-AKMJ is a 6 TB 3.5 inch internal hard drive built for desktop and nearline server workloads. Its SAS 12Gb/s interface and 7200 RPM spindle suit bulk storage, backup targets and archival tasks that demand consistent throughput.

Installation and Common Issues

The bare drive fits any standard 3.5 inch bay and connects with a SAS data and power cable; no tray or caddy is included. Installers must verify that the host controller or backplane supports 12 Gb/s SAS, otherwise the link will negotiate down to 6 Gb/s and reduce available bandwidth.

Capacity and Headroom

Six terabytes provides ample room for large media libraries, VM images or long-term retention sets. Sequential workloads run near the 12 Gb/s interface limit, while random I/O and sustained multi-stream writes will saturate the mechanical latency of a 7.2K spindle before the bus is fully utilised.

Fordele

  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Specifikationer

BrandDell
Model400-AKMJ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM
Form Factor3.5"

Spørgsmål om denne vare

How can I verify the drive runs at 7200 RPM after installation?

Check the drive properties in your RAID controller BIOS or operating system utilities; they will report the spindle speed as 7200 RPM for this model.

What is included with the bare drive and what must I source separately?

The shipment contains only the 3.5" SAS hard drive itself; you will need a compatible SAS backplane or HBA, power and data cables, and a drive tray or caddy for your chassis.

Which capacity version of the 400-AKMJ should I select for a 6 TB requirement?

The 400-AKMJ is offered in a single 6 TB capacity, so that version directly matches your 6 TB requirement.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.