Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive bare unit with circuit board visible

DELL

DELL 400-AKMJ 6TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-HGCS-1BT5Y

A 6 TB 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Dell 400-AKMJ 6 TB SAS Drive

The Dell 400-AKMJ is a 6 TB 3.5 inch internal hard drive built for desktop and nearline server workloads. Its SAS 12Gb/s interface and 7200 RPM spindle suit bulk storage, backup targets and archival tasks that demand consistent throughput.

Installation and Common Issues

The bare drive fits any standard 3.5 inch bay and connects with a SAS data and power cable; no tray or caddy is included. Installers must verify that the host controller or backplane supports 12 Gb/s SAS, otherwise the link will negotiate down to 6 Gb/s and reduce available bandwidth.

Capacity and Headroom

Six terabytes provides ample room for large media libraries, VM images or long-term retention sets. Sequential workloads run near the 12 Gb/s interface limit, while random I/O and sustained multi-stream writes will saturate the mechanical latency of a 7.2K spindle before the bus is fully utilised.

Kohokohdat

  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Tekniset tiedot

BrandDell
Model400-AKMJ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How can I verify the drive runs at 7200 RPM after installation?

Check the drive properties in your RAID controller BIOS or operating system utilities; they will report the spindle speed as 7200 RPM for this model.

What is included with the bare drive and what must I source separately?

The shipment contains only the 3.5" SAS hard drive itself; you will need a compatible SAS backplane or HBA, power and data cables, and a drive tray or caddy for your chassis.

Which capacity version of the 400-AKMJ should I select for a 6 TB requirement?

The 400-AKMJ is offered in a single 6 TB capacity, so that version directly matches your 6 TB requirement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.