Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch SAS hard drive bare unit with circuit board visible

DELL

DELL 400-AKMJ 6TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-HGCS-1BT5Y

A 6 TB 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Dell 400-AKMJ 6 TB SAS Drive

The Dell 400-AKMJ is a 6 TB 3.5 inch internal hard drive built for desktop and nearline server workloads. Its SAS 12Gb/s interface and 7200 RPM spindle suit bulk storage, backup targets and archival tasks that demand consistent throughput.

Installation and Common Issues

The bare drive fits any standard 3.5 inch bay and connects with a SAS data and power cable; no tray or caddy is included. Installers must verify that the host controller or backplane supports 12 Gb/s SAS, otherwise the link will negotiate down to 6 Gb/s and reduce available bandwidth.

Capacity and Headroom

Six terabytes provides ample room for large media libraries, VM images or long-term retention sets. Sequential workloads run near the 12 Gb/s interface limit, while random I/O and sustained multi-stream writes will saturate the mechanical latency of a 7.2K spindle before the bus is fully utilised.

Puncte forte

  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Specificații

BrandDell
Model400-AKMJ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM
Form Factor3.5"

Întrebări despre acest articol

How can I verify the drive runs at 7200 RPM after installation?

Check the drive properties in your RAID controller BIOS or operating system utilities; they will report the spindle speed as 7200 RPM for this model.

What is included with the bare drive and what must I source separately?

The shipment contains only the 3.5" SAS hard drive itself; you will need a compatible SAS backplane or HBA, power and data cables, and a drive tray or caddy for your chassis.

Which capacity version of the 400-AKMJ should I select for a 6 TB requirement?

The 400-AKMJ is offered in a single 6 TB capacity, so that version directly matches your 6 TB requirement.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.