暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive bare unit with circuit board visible

DELL

DELL 400-AKMJ 6TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-HGCS-1BT5Y

A 6 TB 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Form Factor3.5"
  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

Dell 400-AKMJ 6 TB SAS Drive

The Dell 400-AKMJ is a 6 TB 3.5 inch internal hard drive built for desktop and nearline server workloads. Its SAS 12Gb/s interface and 7200 RPM spindle suit bulk storage, backup targets and archival tasks that demand consistent throughput.

Installation and Common Issues

The bare drive fits any standard 3.5 inch bay and connects with a SAS data and power cable; no tray or caddy is included. Installers must verify that the host controller or backplane supports 12 Gb/s SAS, otherwise the link will negotiate down to 6 Gb/s and reduce available bandwidth.

Capacity and Headroom

Six terabytes provides ample room for large media libraries, VM images or long-term retention sets. Sequential workloads run near the 12 Gb/s interface limit, while random I/O and sustained multi-stream writes will saturate the mechanical latency of a 7.2K spindle before the bus is fully utilised.

特長

  • High-capacity 6 TB storage for large data sets
  • Fast 12 Gb/s SAS interface accelerates throughput
  • 7200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Dell part 400-AKMJ ensures genuine compatibility

仕様

BrandDell
Model400-AKMJ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

How can I verify the drive runs at 7200 RPM after installation?

Check the drive properties in your RAID controller BIOS or operating system utilities; they will report the spindle speed as 7200 RPM for this model.

What is included with the bare drive and what must I source separately?

The shipment contains only the 3.5" SAS hard drive itself; you will need a compatible SAS backplane or HBA, power and data cables, and a drive tray or caddy for your chassis.

Which capacity version of the 400-AKMJ should I select for a 6 TB requirement?

The 400-AKMJ is offered in a single 6 TB capacity, so that version directly matches your 6 TB requirement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。