Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Aqua blue duplex multimode fibre patch cable with FC connectors, 25 metre length

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 25m Aqua Blue

SKU CH-P8PY-4HWG3

OM3 multimode duplex cable with FC connectors, 25 m long, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, 0.3 dB maximum, return loss above 38 dB.

Length 25m

  • Supports 10 Gbps links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss for efficient signal transfer
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Enfain OM3 Duplex Fibre Patch Cord

This 25 metre OM3 multimode cable connects switches, servers and data-centre equipment through FC duplex connectors. The 10 gigabit core operates at 850 nm and is suited for short-range 1G, 10G and 40G links.

Thermals, Noise and Power Draw

As a passive optical assembly the cable draws no power and produces no noise. It is rated for continuous operation between -20 °C and +60 °C and survives 1000 mating cycles without degradation.

Build Integration and Constraints

The 3.0 mm PVC jacket requires a minimum bend radius of 330 mm, so routing pathways must accommodate gentle curves. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB. Buyers needing single-mode reach or different connector types should select an alternative cable.

Fordele

  • Supports 10 Gbps links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss for efficient signal transfer
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Specifikationer

Der er endnu ikke offentliggjort specifikationer for denne vare.

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the FC connectors on this 25m OM3 duplex cable and what step is often missed?

Push each FC connector onto the transceiver until the threaded barrel engages, then hand-tighten the nut to seat the ceramic ferrule; the step often missed is cleaning the ferrule end-face with a lint-free wipe and isopropyl alcohol before mating.

What maintenance or replacement will this 3.0mm jacketed OM3 cable need over time?

Inspect and clean the FC ferrule end-faces periodically; the cable is rated for 1000 insertion and removal cycles, so plan replacement when the connection count approaches that limit or if insertion loss exceeds 0.3dB.

What is the first limit that appears when this OM3 FC-FC duplex cable runs at 10G continuously?

The 850nm OM3 core supports 10G up to its rated distance; under sustained use the first limit is typically the 0.3dB maximum insertion loss budget, which can be reached if connectors are dirty or the 330mm bend radius is exceeded.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.