Enfain
Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 25m Aqua Blue
OM3 multimode duplex cable with FC connectors, 25 m long, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, 0.3 dB maximum, return loss above 38 dB.
- Supports 10 Gbps links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss for efficient signal transfer
- High return loss above 38 dB reduces reflection
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C for data-centre use
Enfain OM3 Duplex Fibre Patch Cord
This 25 metre OM3 multimode cable connects switches, servers and data-centre equipment through FC duplex connectors. The 10 gigabit core operates at 850 nm and is suited for short-range 1G, 10G and 40G links.
Thermals, Noise and Power Draw
As a passive optical assembly the cable draws no power and produces no noise. It is rated for continuous operation between -20 °C and +60 °C and survives 1000 mating cycles without degradation.
Build Integration and Constraints
The 3.0 mm PVC jacket requires a minimum bend radius of 330 mm, so routing pathways must accommodate gentle curves. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB. Buyers needing single-mode reach or different connector types should select an alternative cable.
נקודות עיקריות
- Supports 10 Gbps links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss for efficient signal transfer
- High return loss above 38 dB reduces reflection
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C for data-centre use
מפרט טכני
טרם פורסם מפרט טכני לפריט זה.
גרסאות נוספות של דגם זה
5 נוספים באותה הסדרה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
שאלות על הפריט הזה
How do I install the FC connectors on this 25m OM3 duplex cable and what step is often missed?
Push each FC connector onto the transceiver until the threaded barrel engages, then hand-tighten the nut to seat the ceramic ferrule; the step often missed is cleaning the ferrule end-face with a lint-free wipe and isopropyl alcohol before mating.
What maintenance or replacement will this 3.0mm jacketed OM3 cable need over time?
Inspect and clean the FC ferrule end-faces periodically; the cable is rated for 1000 insertion and removal cycles, so plan replacement when the connection count approaches that limit or if insertion loss exceeds 0.3dB.
What is the first limit that appears when this OM3 FC-FC duplex cable runs at 10G continuously?
The 850nm OM3 core supports 10G up to its rated distance; under sustained use the first limit is typically the 0.3dB maximum insertion loss budget, which can be reached if connectors are dirty or the 330mm bend radius is exceeded.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








