Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Aqua blue duplex multimode fibre patch cable with FC connectors, 25 metre length

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 25m Aqua Blue

SKU CH-P8PY-4HWG3

OM3 multimode duplex cable with FC connectors, 25 m long, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, 0.3 dB maximum, return loss above 38 dB.

Length 25m

  • Supports 10 Gbps links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss for efficient signal transfer
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Enfain OM3 Duplex Fibre Patch Cord

This 25 metre OM3 multimode cable connects switches, servers and data-centre equipment through FC duplex connectors. The 10 gigabit core operates at 850 nm and is suited for short-range 1G, 10G and 40G links.

Thermals, Noise and Power Draw

As a passive optical assembly the cable draws no power and produces no noise. It is rated for continuous operation between -20 °C and +60 °C and survives 1000 mating cycles without degradation.

Build Integration and Constraints

The 3.0 mm PVC jacket requires a minimum bend radius of 330 mm, so routing pathways must accommodate gentle curves. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB. Buyers needing single-mode reach or different connector types should select an alternative cable.

Punti di forza

  • Supports 10 Gbps links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss for efficient signal transfer
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the FC connectors on this 25m OM3 duplex cable and what step is often missed?

Push each FC connector onto the transceiver until the threaded barrel engages, then hand-tighten the nut to seat the ceramic ferrule; the step often missed is cleaning the ferrule end-face with a lint-free wipe and isopropyl alcohol before mating.

What maintenance or replacement will this 3.0mm jacketed OM3 cable need over time?

Inspect and clean the FC ferrule end-faces periodically; the cable is rated for 1000 insertion and removal cycles, so plan replacement when the connection count approaches that limit or if insertion loss exceeds 0.3dB.

What is the first limit that appears when this OM3 FC-FC duplex cable runs at 10G continuously?

The 850nm OM3 core supports 10G up to its rated distance; under sustained use the first limit is typically the 0.3dB maximum insertion loss budget, which can be reached if connectors are dirty or the 330mm bend radius is exceeded.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.