EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.
A-Tech
8 GB DDR3L 1600 ECC SO-DIMM with 204 pins and 1.35 V operation for compatible laptops and servers
This 8GB DDR3L ECC SODIMM module is built for laptops, workstations and servers that require error-correcting memory. It runs at 1600MHz with CL11 latency and operates at 1.35V low voltage. The unbuffered 204-pin design fits standard DDR3 SO-DIMM slots in compatible AMD and Intel platforms.
ECC circuitry detects and corrects single-bit errors during continuous operation, helping to prevent data corruption in long-running server and workstation tasks. The 1.35V DDR3L voltage reduces power draw and heat output compared to standard 1.5V DDR3 during extended use. Quality assurance testing validates reliable performance under load.
Confirm that your motherboard or laptop supports DDR3L ECC unbuffered SO-DIMM memory before ordering. Some consumer platforms disable ECC functionality or require registered modules instead. Check the maximum supported speed and total capacity per slot in your system documentation. This module replaces Micron MT18KSF1G72HZ-1G6 and MT18KSF1G72HZ-1G6E2 part numbers.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module operates at 1.35V DDR3L voltage, which draws less power and generates less heat than standard 1.5V DDR3 during sustained operation.
Yes, the system must accept 204-pin DDR3L ECC unbuffered SO-DIMMs at 1.35V; non-ECC or registered-only platforms will not work with this module.
The stick is rated at 1600MHz CL11; it will down-clock to match the slowest installed module while maintaining ECC integrity.
Ebenfalls in dieser Kategorie
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
Womit Sie bezahlen und in welcher Währung Sie die Preise sehen.
Wird von Ihrem Wallet an der Kasse gesendet
Nur zur Anzeige — der Katalog ist in US-Dollar ausgezeichnet
Keine passende Währung gefunden.
Wählen Sie die Sprache, in der die Seite mit Ihnen spricht.
No language matches that.
Neu hier?
Haben Sie bereits eins?
Es gibt keine automatische Zurücksetzung: Dieser Shop versendet keine E-Mails, daher gibt es auch keinen Einmal-Link, den Sie anfordern könnten. Lassen Sie die im Konto hinterlegte Adresse stehen, sie wird von Hand bearbeitet.
Anfrage vermerkt
Es ist nichts auf dem Weg in Ihr Postfach — dieser Shop versendet grundsätzlich keine E-Mails. Jemand bearbeitet diese Anfragen von Hand.
Wieder eingefallen?