A-Tech
A-Tech 8GB DDR4 2400MHz ECC SODIMM 2Rx8 CL17 1.2V Laptop RAM
ECC SO-DIMM laptop memory upgrade with 8 GB capacity, 2400 MHz speed and 1.2 V operation
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
- ECC protection prevents data errors in critical workloads
- 2400 MHz DDR4 speed handles demanding server tasks
- 20V operation reduces power draw and heat
- 260-pin SODIMM fits compatible HP laptop and workstation slots
- 2Rx8 organisation maximises memory density per module
8GB ECC SODIMM for HP workstations
This A-Tech module delivers 8GB of DDR4 2400MHz memory with ECC error correction for compatible HP server and workstation laptops. It operates at the standard 1.2V voltage and uses a 260-pin SO-DIMM form factor with CL17 latency. The unbuffered design suits systems that require registered ECC memory in a laptop footprint.
Major-brand chips validated for HP part numbers
The module uses major-brand memory chips tested to match HP part numbers 862398-852, Y7B56AT, Y7B56AA, 863951-B21 and 1CA79AT. This validation aims to ensure the ECC functionality and timing parameters work correctly in the listed server and workstation platforms. No additional software or accessories are included with the memory stick itself.
Simple slot insertion with BIOS verification
Installation follows the standard SO-DIMM procedure: power off, open the memory compartment, align the 260-pin notch, and press until the clips engage. The most common issue is a system that does not support unbuffered ECC SODIMMs, which will fail to post or disable the ECC feature. Always confirm the laptop's service manual lists ECC unbuffered support before fitting.
Besonderheiten
- ECC protection prevents data errors in critical workloads
- 2400 MHz DDR4 speed handles demanding server tasks
- 20V operation reduces power draw and heat
- 260-pin SODIMM fits compatible HP laptop and workstation slots
- 2Rx8 organisation maximises memory density per module
Technische Daten
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Fragen zu diesem Artikel
Will the ECC unbuffered SODIMM need any firmware updates or chip replacements over its service life?
No firmware updates or chip replacements are required; the module uses major-brand DDR4 chips tested for dependable long-term operation.
What thermal or voltage limit appears first when the 1.20V CL17 module runs at 2400 MHz continuously?
The JEDEC-standard 1.20 V ceiling is reached before any thermal throttle point under sustained DDR4-2400 loads.
How much fan noise or case heat does the 260-pin ECC SODIMM add during all-day server workloads?
The unbuffered DDR4 design draws only standard 1.2 V power, adding negligible heat and requiring no extra cooling airflow.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.



