BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027736BTC
Auf Lager
Brute Networks
Brute Networks 726719-S21-BN 16GB DDR4-2133 CL15 2Rx4 1.20V Registered RDIMM server RAM
16GB DDR4-2133 registered ECC server memory module, HP 726719-S21 compatible
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16GB DDR4-2133 CL15 registered ECC module for server stability
- 2Rx4 dual-rank organisation increases memory density per slot
- 20V low-voltage operation reduces power draw and heat
- Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
- 100% HP 726719-S21 compatible, validated for factory warranty retention
16GB Registered DDR4 Module
This 16GB DDR4-2133 Registered RDIMM delivers ECC error correction and registered buffering for stable server operation. It runs at PC4-17000 speed with CL15 latency and 1.20V voltage. The module uses a 2Rx4 rank configuration on a 288-pin form factor. It is built with major-brand chips and matches HP part number 726719-S21.
Suited for HP Server Upgrades
This module fits administrators expanding memory in compatible HP servers that require registered ECC DDR4. It is not for desktop PCs or laptops that accept only unbuffered non-ECC memory. Buyers needing higher speeds, larger capacities or different rank layouts should look at other modules. Workstations without registered memory support cannot use this DIMM.
16GB Capacity With Registered Headroom
The 16GB capacity handles typical virtualisation workloads and database buffers in supported HP platforms. Registered signalling reduces electrical load on the memory controller, allowing larger total system memory than unbuffered alternatives. The limit is the 16GB per module ceiling; servers needing more memory per slot must use higher-density RDIMMs.
Besonderheiten
- 16GB DDR4-2133 CL15 registered ECC module for server stability
- 2Rx4 dual-rank organisation increases memory density per slot
- 20V low-voltage operation reduces power draw and heat
- Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
- 100% HP 726719-S21 compatible, validated for factory warranty retention
Technische Daten
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Fragen zu diesem Artikel
Does this 288-pin DDR4 RDIMM require a server motherboard that supports registered ECC memory?
Yes, the module is a registered DDR4 RDIMM with ECC, so the system must accept registered ECC DIMMs at 1.20 V.
Will this CL15 2133 MHz module run at the correct speed if installed alongside slower DDR4 DIMMs already in the server?
The memory controller will down-clock all modules to the lowest common speed, so this 2133 MHz stick will operate at the slower DIMM's frequency.
How can I verify the module is recognised as 16 GB at 2133 MHz with CL15 timing after installation?
Check the BIOS memory information or an OS tool such as dmidecode; it should report 16 GB, 2133 MT/s, CAS latency 15 and registered ECC type.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
