Computer Memory Solutions
Computer Memory Solutions 32GB (4x8GB) DDR3 1600 CL11 1.5V 240-pin Z68 Pro3-M Pro3 Gen3 Extreme7 Gen3
32 GB of DDR3 memory in four 8 GB modules running at 1600 MHz with CL11 timing, 1.5 V voltage and 240-pin unbuffered design, validated for ASRock Z68 Pro3-M, Z68 Pro3 Gen3 and Z68 Extreme7 Gen3 boards
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 32 GB total capacity across four 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing for responsive operation
- 5 V unbuffered non-ECC design matches Z68 board requirements
- 240-pin DIMM form factor fits the four memory slots provided
32GB DDR3 kit for ASRock Z68 boards
This 32GB kit contains four 8GB DDR3 1600 modules built for ASRock Z68 Pro3-M, Z68 Pro3 Gen3 and Z68 Extreme7 Gen3 motherboards. Each stick is unbuffered, non-ECC and runs at 1.5V with CL11 timings. The 240-pin DIMMs fill all four memory slots on these platforms.
Upgrade from lower-capacity DDR3 sets
Replacing a 2x4GB or 2x8GB kit with this 4x8GB configuration doubles or quadruples total memory without changing voltage or speed. The jump is worthwhile when workloads exceed the previous limit and the board’s four slots are free. No higher-density DDR3 modules are supported on these chipsets.
DDR3 1600 ceiling on Z68 platform
The Z68 memory controller tops out at DDR3 1600, so faster DDR3 modules will downclock to this speed. Four ranks per channel can limit overclocking headroom and may require relaxed timings. Builders needing more than 32GB or faster transfer rates must change platform.
Besonderheiten
- 32 GB total capacity across four 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing for responsive operation
- 5 V unbuffered non-ECC design matches Z68 board requirements
- 240-pin DIMM form factor fits the four memory slots provided
Technische Daten
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800DIMM |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Asrock Z68 Pro3-M, Z68 Pro3 Gen3, Z68 Extreme7 Gen3 |
| Package Content | 4 Memory RAM Sticks |
Fragen zu diesem Artikel
Will the 240-pin DDR3 modules fit the four memory slots on my Asrock Z68 Pro3-M board?
Yes, the kit provides four 240-pin DDR3 DIMMs that match the board's four slots and 32 GB maximum capacity.
What BIOS setting should I check after installing the 1600 MHz CL11 sticks so they run at the rated speed?
Enable the XMP or DOCP profile in the BIOS; otherwise the modules will default to a lower JEDEC frequency.
Do the unbuffered non-ECC sticks need any periodic cleaning or firmware updates during their service life?
No routine cleaning or firmware updates are required; the modules are covered by a limited lifetime warranty for exchange if a fault appears.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.



